Piranha Oversize/Whitney Ironworker punches - 28XX, 100XX

[bassboy1]

A bunch of ironworker punches for sale. Ended up with these mixed in with a lot of Geka punches I was buying.

Covered with surface rust, but should clean up. Many are sharp, with excellent edges. Some are worn. Let me know which ones you are interested in, and I'll photograph that die specifically.

CST calls this 28XX style. American Punch calls it 100XX. Don't know CPD's number. Should be correct for Piranha with oversize attachment, or for Whitney machines.

63 sets, plus one orphan die.

I'd love for someone to take all at one shot. $200 plus freight if you want them all, and I have a fairly decent freight rate, if you've got a business address with a dock.

If I need to onesy-twosie them, cost is $20 each, buy 3 or more and I'll ship them free in flat rate boxes.







Oversize rounds. Punch size listed. All .030 clearance except last one.
1.75
2.0
2.375
1.625
2.125+2
1.875
1.688 - die is damaged, consider this a punch only
2.063 - die clearance is .063 - die measures 2.125"



Keyholes:
Blunt face - Small portion .688". Large portion 1.375". Outside of small radius to outside of large radius - 2.125". .030" clearance

Center tip - Small .813". Large 1.688". Outside to outside 2.563". .030" clearance

Center tip - small .688". Large 1.375". Outside to outside 2.155". .060" clearance.

[bassboy1]

Slots with center point.
7/16 x 2 1/2
1/2 x 2 1/2
9/16 x 2
11/16 x 2 1/2
11/16 x 2 3/4


Pair of 7/8" squares



Oblongs with blunt faces. Didn't measure these, but will if anyone's interested


Slots with blunt face, smaller die (2 3/4" OD). Again, can measure if there's interest. Turns out, 2 of these are an oddball die size - 2 3/8" OD, which isn't correct for 100xx style. No idea what they are for.



Rest of these are all slots with center point. 8 of them are the smaller oddball 2 3/8" OD die.

[walker]

Damn, I wish I had oversize gear for my Pirahna. Thats a great deal.

[bassboy1]

Damn, I wish I had oversize gear for my Pirahna. Thats a great deal.

It is, if you need even one of those sizes. A single oblong punch and die would cost $292.90 plus shipping from CST.

Problem is, finding the guy that has the oversize gear. When I was looking for Geka's, machines that came with oversize punch were near nonexistent. Probably just as rare for Piranhas, although I have seen a number of their large single end punches at auctions.


I'll be moving my business out of state over the winter, probably January, maybe as soon as December, and I'll scrap them if I still have them at that point. In the meantime, I'm just looking for enough $ to cover my time to package and ship them, vs simply throwing them in the scrap dumpster.

[walker]

If it looks like you are going to scrap them let me know, maybe we can work something out.

[fix it]

Hi, any chance that these are still available?

[bassboy1]

Yes. I'm sending you a PM with my email info.

[bassboy1]

Sold.

[MinnesotaDave]

Good for you and glad to hear it....I was getting nervous that my impulse to buy it was getting a little too strong