Results 1 to 9 of 9

Thread: Powcon 300sm wirefeeders pd10,20 etc.

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Jul 2020
    Posts
    10
    Post Thanks / Like

    Powcon 300sm wirefeeders pd10,20 etc.

    Hey guys i need to know if the pd 10,20 and 30 can work or be adapted to work
    With the 300sm. I have a lead on a cheap pd10. Also any manuals for those feeders would be great.

  2. #2
    Join Date
    Mar 2010
    Location
    Ceres, California
    Posts
    3,918
    Post Thanks / Like

    Re: Powcon 300sm wirefeeders pd10,20 etc.

    Most of the manuals are on the ARCON web site,
    The power drive 10 should work if it has the right plug on the cord.
    If not it can be changed. The powcons work backwards. a closed circuit in the feeder turns the welder output off. open and it has output. You will know because the ticking stops.

  3. #3
    Join Date
    Jul 2020
    Posts
    10
    Post Thanks / Like

    Re: Powcon 300sm wirefeeders pd10,20 etc.

    Ok great. Thank you, that info is a big help. But website not wrkn.

  4. #4
    Join Date
    Mar 2010
    Location
    Ceres, California
    Posts
    3,918
    Post Thanks / Like

    Re: Powcon 300sm wirefeeders pd10,20 etc.

    Looks like it has crashed, should be up in a few days.
    Send me a PM if it doesn't

  5. #5
    Join Date
    Jul 2020
    Posts
    23
    Post Thanks / Like

    Re: Powcon 300sm wirefeeders pd10,20 etc.

    It seems that the Arcon site still does not work!

  6. #6
    Join Date
    Apr 2019
    Posts
    18
    Post Thanks / Like

    Re: Powcon 300sm wirefeeders pd10,20 etc.

    Arcon's site is down because Arcon has been sold (partly). They branched into welding training, and then metal fabrication training, and now safety training. The manufacturing operation has been sold to Mirabel Industrial Welding Equipment.

    Mirabel's site isn't up quite yet, but here is a link to the PD20 manual (I don't have one for the PD10): https://www.dropbox.com/s/4v7ejsy21s...anual.pdf?dl=0

  7. #7
    Join Date
    Dec 2020
    Location
    UK
    Posts
    3
    Post Thanks / Like

    Re: Powcon 300sm wirefeeders pd10,20 etc.

    Hi, iíve noticed that you seem to have a few manuals for Powcon, you donít happen to have one for a 530smp do you? I have a one thatís a bit wonky and need to find the fault so i can fix it and sell it on.

    Thanks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,638,890,276.10861 seconds with 11 queries