-
Miller RFC-23A Foot Pedals
I have two Miller RFC-23A foot pedals that work with some of the older machines like a 330 A/BP or Dialarc HF. Both need a good cleaning, and if I were keeping them, I'd probably strip, paint and then replace the wires, but both worked fine on my 330 A/BP when I tested them. If you're looking for one of these, you know they've gotten pretty expensive....I think nearly $600 for a new one from Miller.
Shipping via USPS large flat-rate box included...$265 per pedal.
Check out my bench vise website:
http://mivise.com
Miller Syncrowave 250DX
Millermatic 350P with XR AlumaPro
Miller Regency 200 with 22A feeder and Spoolmatic 3
Hobart Champion Elite
Everlast PowerTig 210EXT
-
-
Post Thanks / Like - 1 Likes, 0 Dislikes
-
Re: Miller RFC-23A Foot Pedals
I'm trying to get my shop more organized and clear out some space....$125 shipped per pedal.
Check out my bench vise website:
http://mivise.com
Miller Syncrowave 250DX
Millermatic 350P with XR AlumaPro
Miller Regency 200 with 22A feeder and Spoolmatic 3
Hobart Champion Elite
Everlast PowerTig 210EXT
-
Post Thanks / Like - 2 Likes, 0 Dislikes
-
Re: Miller RFC-23A Foot Pedals
Check out my bench vise website:
http://mivise.com
Miller Syncrowave 250DX
Millermatic 350P with XR AlumaPro
Miller Regency 200 with 22A feeder and Spoolmatic 3
Hobart Champion Elite
Everlast PowerTig 210EXT
-
Post Thanks / Like - 1 Likes, 0 Dislikes