Results 1 to 3 of 3

Thread: Miniarc 90i question

  1. #1
    Join Date
    Feb 2017
    Post Thanks / Like

    Miniarc 90i question

    Just picked up a Miniarc 90i to play around with. The pot that adjusts amperage appears to be messed up. No start or stop detente and it spins 360*. Doesn't seem to adjust amperage either. It burns 6011 3/32" ok so it seems to work. Is the pot available direct from ESAB or is there a preferred manufacturer to use? I'd imagine any would work, but the dust and dirt it's exposed to could kill a cheap or unsealed one pretty quick.

    Primeweld CT 520D
    Lincoln 180

  2. #2
    Join Date
    Nov 2005
    Nashville, TN
    Post Thanks / Like

    Re: Miniarc 90i question

    If it is just a pot, I would just record the numbers and search the internet. Surely, somebody will sell you 100 or more.
    Last edited by tapwelder; 02-28-2021 at 02:36 AM.

  3. Likes SARR liked this post
  4. #3
    Join Date
    Mar 2010
    Ceres, California
    Post Thanks / Like

    Re: Miniarc 90i question

    Part number is 951847. Contact any welding supply that sells ESAB parts and they might be able to get one. They might have to add it to their next ESAB order do to minimum Order requirements.
    You might be able to read the specs off the pot and go online to one of the online stores and get one you can make work. Might be enough for an order at one of them.

  5. Likes SARR, tapwelder liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Page generated in 1,624,504,035.71345 seconds with 14 queries