Results 1 to 3 of 3

Thread: Syncrowave 210 won’t load or do anything

  1. #1
    Join Date
    Feb 2021
    Posts
    1
    Post Thanks / Like

    Syncrowave 210 won’t load or do anything

    Hello all

    Just purchased a Syncrowave 210 and it seems to be stuck on the intial start up sequence and won’t do anything else. Says SYNC and 210 and is frozen. The fan runs and it is currently plugged into 120. Any ideas on where to start with this?

    Thanks!

  2. #2
    Join Date
    Jun 2012
    Location
    Sebeka and Bemidji MN
    Posts
    14,726
    Post Thanks / Like

    Re: Syncrowave 210 won’t load or do anything

    Always start with contacting miller. They are very good about responding to their tech emails.
    Dave J.

    Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~

    Syncro 350
    Invertec v250-s
    Thermal Arc 161 and 300
    MM210
    Dialarc
    Tried being normal once, didn't take....I think it was a Tuesday.

  3. #3
    Join Date
    Mar 2010
    Location
    Ceres, California
    Posts
    3,819
    Post Thanks / Like

    Re: Syncrowave 210 won’t load or do anything

    Don't mess with it. get it to a warranty shop if brand new.
    If used and you put a new power pcb in it. you have to load software into it for it to work. instructions on how were included with the pcb.
    Sound like something is wrong with the software. Talk to Miller. they might let you try a software update before taking it in for repair.
    Call them a see what they think.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,618,922,179.91089 seconds with 13 queries