Re: ESAB Trigger wiring (8 Pin Rear)
You can make a short U shpaed jumper to test which sockets are used. When the feed rolls turn you hit the right combo. The wires don't matter. Like you said it's just a switch. But, pins 2 & 3 are for the mig gun switch, 4-8 are for foot control or hand amptrol.
Thermal Arc 320SP ( Lorch )
Cobra Pythons
Thermal Arc 300 AC/DC ( Sanrex )
ESAB 301i AC/DC ( Lorch )
Thermal Arc 161STL ( WTL )
Thermal Arc 190S ( Sanrex )
Cut Master 82, 42. Cut45 ( WTL )
Victor Gas Apps.
Boxes and boxes of welding crap.