Results 1 to 4 of 4

Thread: Powcon 200SM working sale value?

  1. #1
    Join Date
    Jul 2016
    Location
    SW Ontario, Canada
    Posts
    6
    Post Thanks / Like

    Powcon 200SM working sale value?

    This seems like as good a place as any to ask.
    I have a Powcon 200sm with a hobart suitcase MIG and large Tregaskis gun and I really dont use them enough anymore so I was curious what they would be worth if i decide to sell them. The only issue on the Powcon is the dial knob is busted off but you can just grab it to turn the shaft. If its worth while I could open it up and replace the trimpot easily enough.
    Thanks
    Tom.
    Powcon 200 SM
    Hobart Hefty CC/CV
    Linkweld AC-225
    Thermal Dynamics PAK 5XR
    Beccazip 4000

  2. #2
    Join Date
    Mar 2021
    Location
    Near Roanoke, VA
    Posts
    235
    Post Thanks / Like

    Re: Powcon 200SM working sale value?

    A lot of the value of the machine is the location,,

    Three miles north of Boston MA will bring you WAY more for the welder than 200 miles west of nothing in Texas,,

    Beyond location, is general appearance,, post a couple pics,,
    If the machine is covered in dust/dirt,, the value is WAY down,,

    If a guy comes to see it, and your entire shop is a mess and junk piled everywhere,, the buyer will be reluctant to hand over $,$$$,,

    Post some pics,, that will get you a better estimate,, and YES , FIX the knob,,,

  3. #3
    Join Date
    Jul 2016
    Location
    SW Ontario, Canada
    Posts
    6
    Post Thanks / Like

    Re: Powcon 200SM working sale value?

    I'm in Canada so thats way north of Boston. lol
    I'll get it out and get a few snaps once i get in to the garage to tinker.
    Just looking to get an idea if its even worth posting it.
    Thanks.
    Powcon 200 SM
    Hobart Hefty CC/CV
    Linkweld AC-225
    Thermal Dynamics PAK 5XR
    Beccazip 4000

  4. #4
    Join Date
    Mar 2010
    Location
    Ceres, California
    Posts
    3,841
    Post Thanks / Like

    Re: Powcon 200SM working sale value?

    Show that it works and is in good shape. no repairs needed to get it to work. for best price. Some one will buy it. only problem with powcons now is there is no parts left and no tech support. you have to make all repair parts your self or find something else to work. presented right, you should get several 100 for it. The feeder working will add to it. research the value of the feeder and miggun by them selves.
    Then add it up and do the best you can.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,624,025,988.02276 seconds with 11 queries