Results 1 to 2 of 2

Thread: Snap-On MM250SL Questions

  1. #1
    Join Date
    Mar 2021
    Posts
    15
    Post Thanks / Like

    Snap-On MM250SL Questions

    I have had a used Snap-On MM140SL for over 10 years, and its been an excellent welder.
    It has done everything I have asked of it... 22g sheet steel, thru 3/8", some DC TiG, and Aluminum with the spool gun.
    Like most guys, as I have grown, I need more.
    So I just bought a used MM250SL... made good sense, as I have the TiG and Spool gun already.

    I have not welded seriously with the 250 yet, but I have a dilemma...
    Can the 250 do the thin sheet too, or should I keep the 140 for that?

  2. #2
    Join Date
    Nov 2006
    Location
    near Rochester NY
    Posts
    72
    Post Thanks / Like

    Re: Snap-On MM250SL Questions

    i'd say yes. Welded quite a few mower decks with one at an ag shop that I worked at part time.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,624,245,713.36089 seconds with 13 queries