Results 1 to 2 of 2

Thread: Started working on a new CNC plasma

  1. #1
    Join Date
    Nov 2009
    Pensacola , Fla
    Post Thanks / Like

    Started working on a new CNC plasma

    Started on building another CNC Plasma table (#10) just enjoy working in the shop, weather getting better. My shop is small and I have to move things around to use or storage. This is an enclosure for the electronics and computer for the table's controller. For easy of moving I an using a hand truck design and here are some construction images my progress.
    Basic construction is 1" square tube 11 Ga. and a 16 Ga. box for the computer with fold down shelf for keyboard/mouse surface. I added a holder on the rear for a plastic box for the plasma consumables and a mount to wind the power cord on.
    The square tubing was bent on a Gottrikes tubing bender I build years ago.
    Attached Images Attached Images      
    DIY CNC Plasma table USB BOB Price THC
    Hypertherm 65
    Everlast PowerTig 255 EXT
    Miler 180 Mig
    13" metal lathe
    Mill/ Drill
    ECT, ECT,

  2. #2
    Join Date
    Feb 2016
    Myrtle Beach
    Post Thanks / Like

    Re: Started working on a new CNC plasma

    Looks good I bought the plans for the go trikes bender a year or so ago. Thanks for reminding me I need to build it when I have time.
    Lincoln 350MP
    Millermatic 350P
    Syncrowave 250
    1969 SA200
    HTP Invertig 221

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Page generated in 1,623,861,944.71336 seconds with 12 queries