Results 1 to 4 of 4

Thread: Opportunity to buy Shopmaster 300 with 22a feeder

  1. #1
    Join Date
    Sep 2020
    Location
    VT
    Posts
    104
    Post Thanks / Like

    Opportunity to buy Shopmaster 300 with 22a feeder

    A local guy is selling his setup for $3500. I took the info to see what it might be worth. Looks like it's in good shape, but didn't open it up or weld with it.
    Name:  PXL_20210420_201958538.jpg
Views: 83
Size:  101.4 KB
    Glen

    Hobart Champion 16
    Miller XMT 304 CC/CV toasted
    Hobart Hefty CC/CV
    Hobart Handler 140
    Lotos LTP5000D

  2. #2
    Join Date
    Sep 2013
    Location
    central Wis.
    Posts
    5,574
    Post Thanks / Like

    Re: Opportunity to buy Shopmaster 300 with 22a feeder

    Anything else with it ? That's a lot more than I would pay for a unit with a feeder.

  3. #3
    Join Date
    Sep 2020
    Location
    VT
    Posts
    104
    Post Thanks / Like

    Re: Opportunity to buy Shopmaster 300 with 22a feeder

    I thought it was a bit high. The feeder includes a gun, but no regulator or tank. There's a homemade rolling cart that goes with it, and he said the service disconnect/breaker box goes with it too.

    I kinda figured it would be in the $1500 range
    Glen

    Hobart Champion 16
    Miller XMT 304 CC/CV toasted
    Hobart Hefty CC/CV
    Hobart Handler 140
    Lotos LTP5000D

  4. #4
    Join Date
    Sep 2016
    Location
    Detroit, Michigan
    Posts
    872
    Post Thanks / Like

    Re: Opportunity to buy Shopmaster 300 with 22a feeder

    Sure seems too high to me. I just sold a super clean 22A for $600 and I doubt a Shopmaster would bring $2,400 most places, even in minty condition.
    Check out my bench vise website:
    http://mivise.com


    Miller Syncrowave 250DX
    Millermatic 350P with XR AlumaPro
    Miller Regency 200 with 22A feeder and Spoolmatic 3
    Hobart Champion Elite
    Everlast PowerTig 210EXT

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,623,918,060.68603 seconds with 12 queries