migmaster 250 volt/ammeter

[jmm03]

Hello all, has anyone made their own volt/amp display or found a ready made one that works? The original accessory display is long obsolete.I have searched but have not found anything,but possibly missed it. Thanks, Jim

[rexcormack]

How about something like this?

https://www.amazon.com/DROK-Multimet...9208874&sr=8-9

[Steve_12]

[QUOTE = rexcormack; 8811094] Как насчет этого?

https://www.amazon.com/DROK-Multimet...9208874&sr=8-9 [/ QUOTE ]
I wonder how reliable this option is?

[Jack Ryan]

How about something like this?

https://www.amazon.com/DROK-Multimet...9208874&sr=8-9

This meter measures AC current and voltage and may respond to DC but the specified voltage range is 130-500 VAC. The maximum open circuit voltage of the welder is 55 VDC and its rated output voltage is 27 VDC.

It's a good starting point though.

Jack

[rexcormack]

This meter measures AC current and voltage and may respond to DC but the specified voltage range is 130-500 VAC. The maximum open circuit voltage of the welder is 55 VDC and its rated output voltage is 27 VDC.

It's a good starting point though.

Jack

Yeah, I missed the dc part, dang it!

Try this. It has a lot of functions that wouldn't get used but it does cover the volts and amps needed.

https://www.amazon.com/Electricity-M...9700876&sr=8-4

Rex

[Steve_12]

Yeah, I missed the dc part, dang it!

Try this. It has a lot of functions that wouldn't get used but it does cover the volts and amps needed.

https://www.amazon.com/Electricity-M...9700876&sr=8-4

Rex

Yes, it's a great meter! Unfortunately, it's out of stock at the moment

[Steve_12]

There are some good analogues on Amazon, though!