Results 1 to 3 of 3

Thread: HTP tig cooler hose

  1. #1
    Join Date
    Mar 2005
    Location
    Under a Rock
    Posts
    6,169
    Post Thanks / Like

    HTP tig cooler hose

    Does anyone know where I can find replacement hose for the HTP cooler?

    I feel itís some kind of metric size possibly?
    Iíve tried a couple different hoses
    3/8
    5/16

    And itís either too tight or too loose.

    Iíd like about 6 feet if I can get it

    Miller 211
    Hypertherm PM 45
    1961 Lincoln Idealarc 250
    HTP 221


    True Wisdom only comes from Pain.

  2. #2
    Join Date
    Jun 2012
    Location
    Laredo, Tx
    Posts
    5,759
    Post Thanks / Like

    Re: HTP tig cooler hose

    5/16" is tight, so 8.5mm would be better if available. But I made 5/16" work.
    1st on WeldingWeb to have a scrolling sig!

    HTP Invertig 400
    HTP Invertig 221
    HTP ProPulse 300
    HTP ProPulse 200 x2
    HTP ProPulse 220MTS
    HTP Inverarc 200TLP
    HTP Microcut 875SC

  3. Likes John T liked this post
  4. #3
    Join Date
    Dec 2016
    Posts
    312
    Post Thanks / Like

    Re: HTP tig cooler hose

    looks to be 8mm ID.5/16 will be slightly smaller but should fit .a negligible 0.06 mm or 0.003 in smaller.
    mcmaster and grainger have metric stuff available.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,627,921,691.07026 seconds with 14 queries