Results 1 to 22 of 22

Thread: Learn Something New Every Day.

  1. #1
    Join Date
    Sep 2013
    Posts
    1,648
    Post Thanks / Like

    Learn Something New Every Day.

    The only reason I clicked on the vide was because the thumbnail showed those torpedo levels and I've been thinking about buying one or two. Heard nothing but good about them, so any excuse to buy a new tool...

    Anyhow, lucky me, I would never have thought to use the level to find Top Dead Center on a pipe like he shows. Quick and simple, and pretty dang precise if you do your part right. Certainly good enough for what I do.

    And that poor-man's turntable? Pretty slick! I can definitely see me cobbling together a smaller version for here in the shop.

    Or that chained spacer for the vise? Slick thinking if you do a lot of pipe work.

    So, yea, definitely a fun video to watch.


  2. Likes Munkul, Meltedmetal, Shootr, timrb, farmersammm liked this post
  3. #2
    Join Date
    Jul 2018
    Location
    Cumbria, UK
    Posts
    1,600
    Post Thanks / Like

    Re: Learn Something New Every Day.

    I follow this guy on instagram, he's certainly got his trade dialled for being a young guy. He's in the business of being paid per completed pipe spool, which is quite rare over here, but it makes him work as efficiently as possible.

    I wouldn't be without a torpedo level, I use them for everything! Barely ever get the long levels out.

    I like the chained spacer in the vice. Our pipe welders aren't as cool as that.
    Last edited by Munkul; 05-25-2021 at 05:57 AM.
    Murphy's Golden Rule: Whoever has the gold, makes the rules.

  4. Likes VaughnT liked this post
  5. #3
    Join Date
    Sep 2013
    Posts
    1,648
    Post Thanks / Like

    Re: Learn Something New Every Day.

    Quote Originally Posted by Munkul View Post
    I wouldn't be without a torpedo level, I use them for everything! Barely ever get the long levels out.
    Those Stabila levels look mighty nice, and I kinda like the rotating bezel that lets you set and find various angles. Never much cared for the digital angle-finders because electronics die a miserable death in my shop. With the rotating bubble, though, it wouldn't be hard at all to dial it until you get horizontal... and then you know your angle.

  6. #4
    Join Date
    Jul 2018
    Location
    Cumbria, UK
    Posts
    1,600
    Post Thanks / Like

    Re: Learn Something New Every Day.

    Stabila is the benchmark for levels over here. I buy them for the guys at work. I always spec the magnetic ones too, they're even more handy - model 81SM with 2 fixed bubbles, usually.

    in my own shop, I have Stanley fatmax levels:
    https://www.toolstation.com/stanley-...EaAoNEEALw_wcB

    They have 3 bubbles, magnets and a groove for squaring on piping, they're cheaper than the Stabila equivalent, and I've used one of them for years and it's still perfect.
    Murphy's Golden Rule: Whoever has the gold, makes the rules.

  7. #5
    Join Date
    Sep 2013
    Posts
    1,648
    Post Thanks / Like

    Re: Learn Something New Every Day.

    Quote Originally Posted by Munkul View Post
    Stabila is the benchmark for levels ...

    ...they're cheaper than the Stabila equivalent, and I've used one of them for years and it's still perfect.
    Seems to me the difference in price is because one's made in Germany and the other's made in some third-world country. Given the choice, and the bad reviews I've found on both Craftsman and Stanley, I think I might opt for the Stabila just so I don't end up burned. If it wasn't for bad luck, I'd have no luck at all!

  8. Likes Munkul liked this post
  9. #6
    Join Date
    Jul 2018
    Location
    Cumbria, UK
    Posts
    1,600
    Post Thanks / Like

    Re: Learn Something New Every Day.

    haha! If i was buying again, I'd buy Stabila, definitely. I'm getting more and more snobbish about my tools and where they are made.

    That said, I have to destroy the Stanley one first, and it's going strong still
    Murphy's Golden Rule: Whoever has the gold, makes the rules.

  10. Likes Lis2323, VaughnT liked this post
  11. #7
    Join Date
    May 2020
    Location
    Arizona
    Posts
    872
    Post Thanks / Like

    Re: Learn Something New Every Day.

    In a prior life I worked with a lot of masons - they wouldn't let anyone on a job with anything but a Stabila.
    Yeswelder MIG-205DS
    (3) Angle Grinders at the Ready
    Just a hobbyist trying to improve

  12. Likes VaughnT liked this post
  13. #8
    Join Date
    Aug 2014
    Location
    B.C. Canada
    Posts
    5,592
    Post Thanks / Like

    Re: Learn Something New Every Day.

    I use mine on pretty well every project. It's invaluable for getting pieces parallel when you are unable to level the whole assembly.







    Sent from my iPhone using Tapatalk
    :

  14. Likes Munkul liked this post
  15. #9
    Join Date
    Feb 2009
    Location
    Central CA
    Posts
    354
    Post Thanks / Like

    Re: Learn Something New Every Day.

    Too bad we didn't get to see that piece installed. I have a hunch he was right on the money with the fit.

    Tim

  16. #10
    Join Date
    Dec 2013
    Posts
    1,846
    Post Thanks / Like

    Re: Learn Something New Every Day.

    Quote Originally Posted by Munkul View Post
    haha! If i was buying again, I'd buy Stabila, definitely. I'm getting more and more snobbish about my tools and where they are made.

    That said, I have to destroy the Stanley one first, and it's going strong still
    Hey, we can fix that for ya.
    ---Meltedmetal

  17. Likes Lis2323 liked this post
  18. #11
    Join Date
    Feb 2009
    Location
    Birmingham, AL
    Posts
    341
    Post Thanks / Like

    Re: Learn Something New Every Day.

    Why is it called a pipe "spool"?

  19. #12
    Join Date
    May 2007
    Posts
    3,699
    Post Thanks / Like

    Re: Learn Something New Every Day.

    Quote Originally Posted by VaughnT View Post
    els and I've been thinking about buying one or two. Heard nothing but good about them, so any excuse to buy a new tool...
    give me a chance, and ill break that "nothing but good streak"
    im eatin lunch real fast now , tonight or next coupl3 nights i can show u what i mean

  20. Likes VaughnT liked this post
  21. #13
    Join Date
    May 2007
    Posts
    3,699
    Post Thanks / Like

    Re: Learn Something New Every Day.

    vaughn, i got the torpedo level on the video cover showing 3 vials (the one at a 45). the vials are truly accurate, and two still are 13 yrs later. problem started shortly after buying it for fifty some bucks, when a magnet came out. stabila tried to give me one that had a groove on bottom, and screws that hold in magnets, w/ only two vials (horiz/vert.). i told them i dont like grooves on base, i want the same level i bought but new. they said no. they also refused to refund me. so about a yr later, the second magnet fell out. then a few yrs later, the liquid in the 45 degree vial leaked/dissolved. i treated it like a babay its whole life, other than it dropped a couple times at pipe stand height, due to no magnets. so i took it to lowes, and used it to check over a dozen cobalt levels they had in stock. i bought the 4 good/accurate ones they had, then took them home and ground tapers on them to fit my pockets. they are still(accurate) good today, and they are losing there magnets too, but have held up better. i like levels w/ an open window(no framing on corner edges) for visibilty, and must be slender tapered to go in out of pockets fast/easy. must also have flat base, so i can wipe it on back of my gloves/pants to clean, before slapping it on pipe w/ one hand. postioning a grooved base w/ gloves on - too much time/two hands, and simply not needed. i took pics of what im talkin about, and will post them soon
    Last edited by 123weld; 05-26-2021 at 11:17 PM.

  22. Likes VaughnT liked this post
  23. #14
    Join Date
    Sep 2013
    Posts
    1,648
    Post Thanks / Like

    Re: Learn Something New Every Day.

    Dang! That certainly sucks. I can't find any of the rotating-vial model for less than $80, and for that kinda cash I expect bomb-proof construction!!

  24. #15
    Join Date
    May 2007
    Posts
    3,699
    Post Thanks / Like

    Re: Learn Something New Every Day.

    Quote Originally Posted by VaughnT View Post
    Dang! That certainly sucks. I can't find any of the rotating-vial model for less than $80, and for that kinda cash I expect bomb-proof construction!!
    exactly, ill pay good and hard once if i have too , but only once. i did find replaceable magnets drilled and counter sunk on ebay, but they were 8.50 a piece. if i find them alot cheaper, i might fix all my levels up some winter rainy day. crafstman has a red one fro 20 bucks w/ rotating vial, but base hase v groove, and i dont like how the bubble is so big, it hits both lines (each side), when level. its actually a half descent level though. i still take my stabila around, and use it for checking/calibrating others/work
    Last edited by 123weld; 05-26-2021 at 11:33 PM.

  25. Likes VaughnT liked this post
  26. #16
    Join Date
    Mar 2008
    Location
    Georgetown, Texas
    Posts
    2,019
    Post Thanks / Like

    Re: Learn Something New Every Day.

    I've had this curve-o-mark for close 40 years and it has worked well and been accurate. I don't know if they are still made but I would recommend it.
    Attached Images Attached Images  

  27. Likes VaughnT, whtbaron liked this post
  28. #17
    Join Date
    Nov 2005
    Location
    Nashville, TN
    Posts
    4,425
    Post Thanks / Like

    Re: Learn Something New Every Day.

    Quote Originally Posted by VaughnT View Post
    Dang! That certainly sucks. I can't find any of the rotating-vial model for less than $80, and for that kinda cash I expect bomb-proof construction!!
    Try flange wizard.

  29. #18
    Join Date
    May 2007
    Posts
    3,699
    Post Thanks / Like

    Re: Learn Something New Every Day.

    heres the pics i talked about. during the short time that the stabila had magnets, it made it difficult at times (pulling to side on short stuff), due to the poor spacing. the greye i picked are just as accurate, except one of the vert vials on one of them
    [ATTACH=CONFIG]1728099
    [/ATTACH]


    Name:  103_9995.jpg
Views: 392
Size:  94.8 KB
    Attached Images Attached Images  
    Last edited by 123weld; 05-28-2021 at 01:30 AM.

  30. Likes VaughnT liked this post
  31. #19
    Join Date
    Dec 2013
    Posts
    1,846
    Post Thanks / Like

    Re: Learn Something New Every Day.

    Couldn't you epoxy the magnets back in?
    ---Meltedmetal

  32. #20
    Join Date
    May 2007
    Posts
    3,699
    Post Thanks / Like

    Re: Learn Something New Every Day.

    its pretty tight fit in there, u can see i tried drilling a lil, its plastic like, i dont think it will bond. i seen video on how stabilla builds them, the vials are encased in a foam or plastic , + the 45 vial is as worthless as **** on a bore.
    and honestly, its the "principle of the screw", that bothers me the most. they wouldnt replace it w/ the same, or give me my $53 back. reason being, they know itll come back, cuz theres obviously problems w/ the model. what id like to do, is give them the honest advertising they deserve. that would be, i put it on a 30 day set price on ebay for 530.00 , and let it list amongst all the others, so potential buyers can see it.

  33. Likes VaughnT liked this post
  34. #21
    Join Date
    Sep 2013
    Posts
    1,648
    Post Thanks / Like

    Re: Learn Something New Every Day.

    Putting the two magnets that close together kinda sucks. I can see how it would provide a stronger hold on a shorter span, the other levels would only have one magnet holding them in place for the same span, but.... Looks to me like there'd be room for a third magnet between the vials, and not doing that makes the whole thing less stable in a lot of applications.

    For all the hoopla Stablia gets, I would expect better engineering from them. Being accurate is great, but not when it comes at the expense of your level falling to the floor.

    I'm not buying a "made in chicom territory" torpedo level, but I'll have to think hard about buying something from Stabila.

  35. Likes 123weld liked this post
  36. #22
    Join Date
    May 2010
    Location
    ct.
    Posts
    1,400
    Post Thanks / Like

    Re: Learn Something New Every Day.

    Quote Originally Posted by AlabamaJoe View Post
    Why is it called a pipe "spool"?
    I’ve always assumed it’s because a short length of pipe
    with a flange welded on each end resembles a spool.
    Miller a/c-d/c Thunderbolt XL
    Millermatic 180
    Purox O/A
    Smith Littletorch O/A
    Hobart Champion Elite

  37. Likes AlabamaJoe liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,638,396,832.46597 seconds with 13 queries