Results 1 to 2 of 2

Thread: Marking with the plasma

  1. #1
    Join Date
    Oct 2016
    Location
    Tuscumbia, Alabama
    Posts
    9
    Post Thanks / Like

    Marking with the plasma

    If Mr. Colt is available I need your help sir. I have an HPR 400XD and I need to mark some material. I need it below the surface and I canít seem to get it to scribe below the surface. I go to edit my letters change them to marking and put a depth of .0625. And it marks the same as if I didnít put a depth. It doesnít matter if itís .0625 or .25Ē. Do you have any suggestions? Thank you for any help.
    Miller 211
    Miller Dynasty 210

  2. #2
    Join Date
    Jun 2021
    Posts
    5
    Post Thanks / Like

    Re: Marking with the plasma

    Quote Originally Posted by bamadogred View Post
    If Mr. Colt is available I need your help sir. I have an HPR 400XD and I need to mark some material. I need it below the surface and I canít seem to get it to scribe below the surface. I go to edit my letters change them to marking and put a depth of .0625. And it marks the same as if I didnít put a depth. It doesnít matter if itís .0625 or .25Ē. Do you have any suggestions? Thank you for any help.
    Hi, what material are you trying to mark or by which process, N2 vs Ar?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,632,583,943.58422 seconds with 11 queries