Results 1 to 9 of 9

Thread: bad gateway 502

  1. #1
    Join Date
    Oct 2015
    Location
    NW New Jersey
    Posts
    895
    Post Thanks / Like

    bad gateway 502

    Looking up old thread and got "Bad Gateway 502" for the link: https://weldingweb.com/vbb/threads/7...-stick-welding

    Thanks
    Airco 250 ac/dc Heliwelder Square wave
    Miller Synchrowave 180 sd
    Miller Econo Twin HF
    Lincoln 210 MP
    Dayton 225 ac/dc
    Victor torches
    Snap-On YA-212
    Lotos Cut60D

  2. #2
    Join Date
    Oct 2014
    Posts
    1,230
    Post Thanks / Like

    Re: bad gateway 502


  3. Likes whtbaron liked this post
  4. #3
    Join Date
    Oct 2006
    Location
    Illinois
    Posts
    9,785
    Post Thanks / Like

    Re: bad gateway 502

    Many old posts and photos were lost when Weldingweb went dead. I think it crashed a couple of years and was down for awhile.


    Sent from my iPhone using Tapatalk

  5. #4
    Join Date
    May 2014
    Location
    Manitoba Canada
    Posts
    4,912
    Post Thanks / Like

    Re: bad gateway 502

    250 amp Miller DialArc AC/DC Stick
    F-225 amp Forney AC Stick
    230 amp Sears AC Stick
    Lincoln 180C MIG
    Victor Medalist 350 O/A
    Cut 50 Plasma
    Les

  6. #5
    Join Date
    May 2014
    Location
    Manitoba Canada
    Posts
    4,912
    Post Thanks / Like

    Re: bad gateway 502

    Quote Originally Posted by BD1 View Post
    Many old posts and photos were lost when Weldingweb went dead. I think it crashed a couple of years and was down for awhile.


    Sent from my iPhone using Tapatalk
    It's not an old one.... had contributors on it up to 2 days ago...
    250 amp Miller DialArc AC/DC Stick
    F-225 amp Forney AC Stick
    230 amp Sears AC Stick
    Lincoln 180C MIG
    Victor Medalist 350 O/A
    Cut 50 Plasma
    Les

  7. #6
    Join Date
    Apr 2013
    Posts
    266
    Post Thanks / Like

    Re: bad gateway 502

    i bumped each of them, they should work now.

  8. Likes whtbaron liked this post
  9. #7
    Join Date
    Oct 2014
    Posts
    1,230
    Post Thanks / Like

    Re: bad gateway 502

    Yes sir thanks. Haven't seen so much of the 502 thing lately. This one came and didn't seem it was ever going to fix itself. Thank you.

  10. #8
    Join Date
    Oct 2015
    Location
    NW New Jersey
    Posts
    895
    Post Thanks / Like

    Re: bad gateway 502

    It seems to be only page one for me : 502 Bad Gateway
    nginx


    page 2 and page3 were/are fine, There is a picture I was looking for on that first page.

    Regards
    Airco 250 ac/dc Heliwelder Square wave
    Miller Synchrowave 180 sd
    Miller Econo Twin HF
    Lincoln 210 MP
    Dayton 225 ac/dc
    Victor torches
    Snap-On YA-212
    Lotos Cut60D

  11. #9
    Join Date
    Oct 2014
    Posts
    1,230
    Post Thanks / Like

    Re: bad gateway 502

    Quote Originally Posted by albrightree View Post
    It seems to be only page one for me : 502 Bad Gateway
    nginx


    page 2 and page3 were/are fine, There is a picture I was looking for on that first page.

    Regards
    I high jacked your thread and yours didn't get fixed first. I am very sorry sir.

    Sucker is still dead on my end too or I would print screen the pic you are looking for at least. Same thing. Other pages work but not page 1.

    https://weldingweb.com/vbb/threads/7...light=Rod-type

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,634,984,210.61590 seconds with 12 queries