Page 2 of 2 FirstFirst 12
Results 26 to 30 of 30

Thread: Oxy acetyline issues

  1. #26
    Join Date
    Oct 2014
    Posts
    1,185
    Post Thanks / Like

    Re: Oxy acetyline issues

    This is likely the kit to rebuild that regulator. Please verify before purchase of course.

    https://www.amazon.com/Victor-Acetyl...4&s=hi&sr=1-20

  2. #27
    Join Date
    Apr 2006
    Location
    Outside of Raleigh, NC
    Posts
    1,199
    Post Thanks / Like

    Re: Oxy acetyline issues

    Quote Originally Posted by vanderloo01 View Post
    The regulator is a Victor. It's very old. Posted a pic below in this thread. Think it's worth a rebuild?
    I'd have that rebuilt in a heartbeat. Those are nice regulators.
    Miller Trailblazer Pro 350D
    Miller Suitcase MIG
    Miller Spectrum 2050
    Miller Syncrowave 250DX
    Lincoln 210MP

  3. Likes 12V71 liked this post
  4. #28
    Join Date
    Aug 2012
    Location
    AR
    Posts
    2,005
    Post Thanks / Like

    Re: Oxy acetyline issues

    Quote Originally Posted by danielplace View Post
    This is likely the kit to rebuild that regulator. Please verify before purchase of course.

    https://www.amazon.com/Victor-Acetyl...4&s=hi&sr=1-20
    That link to amazon is for an ACETYLENE regulator, not an oxygen one!

  5. #29
    Join Date
    Oct 2014
    Posts
    1,185
    Post Thanks / Like

    Re: Oxy acetyline issues

    Quote Originally Posted by shortfuse View Post
    That link to amazon is for an ACETYLENE regulator, not an oxygen one!
    Damn. I had page open with each on it and copied the Acetylene first and posted it and realized my mistake and went back and thought I copied the one from oxygen and fixed it. I never tried the link. It must have posted same one from the first round.

    Anyhow here is the OXYGEN ONE. https://www.amazon.com/Victor-SR450D...36&s=hi&sr=1-1

  6. #30
    Join Date
    May 2021
    Location
    Fair Oaks Ca
    Posts
    7
    Post Thanks / Like

    Re: Oxy acetyline issues

    Thanks again for all the help everyone. I have it in the shop being rebuilt right now.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,631,952,946.39087 seconds with 14 queries