Results 1 to 12 of 12

Thread: Aftermarket parts and why you need a lathe!!

  1. #1
    Join Date
    Mar 2010
    Location
    Morton, Washington
    Posts
    5,020
    Post Thanks / Like

    Aftermarket parts and why you need a lathe!!

    As some of you know I drive old VW MK1 rabbit diesels. A couple month ago I picked up a $500 pickup and I've been running the hell out of it. I thought I had a bad wheel bearing, but after I pulled it apart it was obvious the CV axle was bad. So I called around and found a new aftermarket axle for $60 out the door. It came well boxed, looked right, and slid right in. Nothing like in the old days when a reman axle would have dinged splines. Unfortunately, after I torqued it down it no longer would spin. Huh? I pulled it back apart and discovered the output hub was contacting the spindle knuckle. A quick measure and I discovered it was 2mm oversized. So rather than take it back I decided to put it in the lathe and turn it down. Not sure what the steel is but it was hard turning. I've never turned an assembled CV axle so I thought some of you might enjoy a few pictures. I wasn't sure how it would go but about 10 minutes later I had it back on the truck. I couldn't even return it in the time it took to fix. I often wonder how anyone gets by without a lathe.

    Name:  IMG_5746.jpg
Views: 401
Size:  107.6 KB
    Name:  IMG_5747.jpg
Views: 402
Size:  87.2 KB
    Name:  IMG_5748.jpg
Views: 399
Size:  104.3 KB
    Name:  IMG_5749.jpg
Views: 395
Size:  107.0 KB

  2. #2
    Join Date
    Apr 2016
    Posts
    377
    Post Thanks / Like

    Re: Aftermarket parts and why you need a lathe!!

    I bought some rebuilt cv axles once for a project (was just putting longer axles in them). When I finished with the two axles, I had one ball left over.... I guess someone doing the original rebuild lost track and lost an extra in the grease! I also got a caliper from napa that had the wrong size bracket with it and had to re-use my old one. I guess it's all part of the fun of it, and the lathe just makes it that much more fun (instead of a pita)..

  3. #3
    Join Date
    Nov 2009
    Location
    Arizona
    Posts
    2,781
    Post Thanks / Like

    Re: Aftermarket parts and why you need a lathe!!

    I showed this to my wife and tried to explain but she still does not think I need a lathe. I'm going to try for a press next.
    Miller Challenger 172
    Miller Thunderbolt AC/DC 225/150
    Miller Maxstar 150 STL
    Victor 100C
    Victor Journeyman
    Oxweld OA
    Harris O/A
    Smith O/A little torch

    No, that's not my car.

  4. Likes Beefman, whtbaron, superwelder liked this post
  5. #4
    Join Date
    Dec 2012
    Location
    Woodstock, Ga
    Posts
    604
    Post Thanks / Like

    Re: Aftermarket parts and why you need a lathe!!

    Lathe is very handy to have around indeed, thousandths matter ....
    Magazines have issues, everything else has problems

  6. #5
    Join Date
    Apr 2013
    Location
    Marina del Rey
    Posts
    808
    Post Thanks / Like

    Re: Aftermarket parts and why you need a lathe!!

    It's amazing how often I need to use my lathe.



  7. Likes Lis2323, Roert42 liked this post
  8. #6
    Join Date
    Sep 2005
    Location
    Cave Creek AZ
    Posts
    3,256
    Post Thanks / Like

    Re: Aftermarket parts and why you need a lathe!!

    Nice save! Not sure how people survive without machine tools.

  9. #7
    Join Date
    Jan 2011
    Location
    W. Wisc
    Posts
    589
    Post Thanks / Like

    Re: Aftermarket parts and why you need a lathe!!

    I often wonder how anyone gets by without a lathe.
    Why...you have a friend with a lathe... Duh!
    -Dave
    XMT304 with: 22A Feeder, or HF251 Hi Freq DC TIG air cooled

  10. Likes Lis2323 liked this post
  11. #8
    Join Date
    Mar 2010
    Location
    Morton, Washington
    Posts
    5,020
    Post Thanks / Like

    Re: Aftermarket parts and why you need a lathe!!

    Quote Originally Posted by bigb View Post
    I showed this to my wife and tried to explain but she still does not think I need a lathe. I'm going to try for a press next.
    A press is good. Just make sure it's 50T or better. I use my lathes way more than my presses.

    Quote Originally Posted by pepi View Post
    Lathe is very handy to have around indeed, thousandths matter ....
    My bad, 2mm is about 80 thou (0.078").

    Quote Originally Posted by ezduzit View Post
    It's amazing how often I need to use my lathe.
    Nice little Monarch. I likely end up using the lathe as much or more than my bench grinder.

    Quote Originally Posted by walker View Post
    Nice save! Not sure how people survive without machine tools.
    The wife and I watch the house hunting shows and I always wonder where the shop is. When building a new house, always build your big shop first or your shop money will be spent on the house.

    Quote Originally Posted by davec View Post
    Why...you have a friend with a lathe... Duh!
    Maybe that's my I have so many friends. I'm like a doctor, they are always coming to me with their problems.

  12. Likes Meltedmetal, ezduzit, Roert42 liked this post
  13. #9
    Join Date
    Mar 2009
    Posts
    328
    Post Thanks / Like

    Re: Aftermarket parts and why you need a lathe!!

    Every once in a while I can remind my wife that machine tools are useful. She warped a nice farberware pan that we had for years. Press made short work of that. She bought a new nylon strainer for the sink that needed a little lathe work to fit properly.

    I agree, how do people get along without machine tools?

    BTW, that Monarch is just plain beautiful. Something to aspire to if I ever give up my 1942 South Bend 13".

  14. Likes ezduzit liked this post
  15. #10
    Join Date
    Feb 2016
    Location
    Six Mile SC
    Posts
    39
    Post Thanks / Like

    Re: Aftermarket parts and why you need a lathe!!

    Love my lathe, I find it essential to maintain my British motorcycles. But sometimes I turn things just for the fun of it.
    Attached Images Attached Images  

  16. Likes 12V71, whtbaron liked this post
  17. #11
    Join Date
    Dec 2018
    Posts
    5,277
    Post Thanks / Like

    Re: Aftermarket parts and why you need a lathe!!

    Hey..........are all these shop pics 'glamour shots', or are they REALLY that clean and orderly???????????????????

  18. Likes Roert42 liked this post
  19. #12
    Join Date
    May 2021
    Location
    Arizona
    Posts
    8
    Post Thanks / Like

    Re: Aftermarket parts and why you need a lathe!!

    No, not all shops are neat, especially when you have to move things around to make space to fabricate something large. My shop is a mess right now, as I am fabricating a steel table for the milling Machine.
    High Desert Dweller

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,628,117,521.55547 seconds with 14 queries