ReplyIf the holes were slightly bigger you could probably cut a piece of 5/16 or 3/8 hose … and split it
To protect the wires from chaffing…
WeldingWeb Artisan
I bought a small utility trailer and they ran a piece of square tube the same size (1-1/2") as the floor boards full length of the trailer to carry the wiring. It is between the boards on the floor. Works okay, but it is new so time will tell.
---Meltedmetal
Master Welder
If the holes were slightly bigger you could probably cut a piece of 5/16 or 3/8 hose … and split it
To protect the wires from chaffing…
Miller 211
Hypertherm PM 45
1961 Lincoln Idealarc 250
HTP 221
True Wisdom only comes from Pain.
WeldingWeb Tradesman
got 1/2 done yesterday
WeldingWeb Tradesman
Finished before a small rain shower. Im trying to decide if I want to put used oil on it or not. I don't want a slipper surface or to track oil from my shoes
Last edited by Millwrightdude; 07-12-2021 at 06:32 PM.
Master Welder
Linseed oil may be a good choice to help preserve the deck.
Posting Permissions