Results 1 to 3 of 3

Thread: Miller cst 250 wiring

  1. #1
    Join Date
    Jul 2021
    Post Thanks / Like

    Miller cst 250 wiring

    Just bought a used miller CST 250. It came with four prong cord but had 3 prong plug. The wires used were white, black, and green. Im confused as to the correct wiring inside the welder. It seems as though the previous owner used the white neutral in place of the red hot. What do i do here

  2. #2
    Join Date
    May 2007
    Post Thanks / Like

    Re: Miller cst 250 wiring

    theres no common here. black and white are for hot in single phase, leave the red out. add the red as a hot for thee phase only. green is ground

  3. Likes Broccoli1 liked this post
  4. #3
    Join Date
    Dec 2007
    Los Angeles
    Post Thanks / Like

    Re: Miller cst 250 wiring

    as 123weld said.

    Section 3-12 in the manual
    Ed Conley
    MM211 (Sold)
    Passport Plus & Spool gun
    Lincoln SP135 Plus- (Gone to a good home)
    Klutch 120v Plasma cutter
    SO 2020 bender
    Beer in the fridge

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Page generated in 1,638,055,450.49228 seconds with 14 queries