Results 1 to 5 of 5

Thread: Powcon 550 to single phase

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Sep 2021
    Posts
    7
    Post Thanks / Like

    Powcon 550 to single phase

    Hi, I am trying to convert the 550 Powcon to single phase. I changed the tabs from 460 to 230. The plug is where I'm confused. I hooked it up without the red wire
    Turns on, fan turns on but not sure of it's correct. Anyone have any suggestions.

    Thank you,
    Ruben

  2. #2
    Join Date
    Apr 2019
    Posts
    14
    Post Thanks / Like

    Re: Powcon 550 to single phase

    Hi Ruben,

    If it turns on and fan is running, then it sounds like you've got it right. Are you having other issues with it?


    Best regards,
    Mike

  3. #3
    Join Date
    Sep 2021
    Posts
    7
    Post Thanks / Like

    Re: Powcon 550 to single phase

    By Yes, it runs. I got the 550 manual and it gave single-phase instructions. I used 3 wires green white and black. Then isolated the red per the manual. Now just trying to hook up the power drive 1 to it. The point doesn't match up. I need to get a diagram for the power drive. Any suggestions.

    Thank you
    Ruben

  4. #4
    Join Date
    Apr 2019
    Posts
    14
    Post Thanks / Like

    Re: Powcon 550 to single phase

    Hi Ruben,

    The Mirabel website is finally up and running. You can download the Operation Manual for the Power Drive I here: mirabeliwe.com/downloads. You can see the schematic including the remote pin-out toward the end on page 4-25. Let me know if you have any questions.


    Best regards,
    Mike

  5. #5
    Join Date
    Sep 2021
    Posts
    7
    Post Thanks / Like

    Re: Powcon 550 to single phase

    Thank you again Mike. This is a great resource. I appreciate it
    Ruben

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,634,497,524.83524 seconds with 11 queries