Results 1 to 3 of 3

Thread: Powcon 550 to single phase

  1. #1
    Join Date
    Sep 2021
    Posts
    6
    Post Thanks / Like

    Powcon 550 to single phase

    Hi, I am trying to convert the 550 Powcon to single phase. I changed the tabs from 460 to 230. The plug is where I'm confused. I hooked it up without the red wire
    Turns on, fan turns on but not sure of it's correct. Anyone have any suggestions.

    Thank you,
    Ruben

  2. #2
    Join Date
    Apr 2019
    Posts
    10
    Post Thanks / Like

    Re: Powcon 550 to single phase

    Hi Ruben,

    If it turns on and fan is running, then it sounds like you've got it right. Are you having other issues with it?


    Best regards,
    Mike

  3. #3
    Join Date
    Sep 2021
    Posts
    6
    Post Thanks / Like

    Re: Powcon 550 to single phase

    By Yes, it runs. I got the 550 manual and it gave single-phase instructions. I used 3 wires green white and black. Then isolated the red per the manual. Now just trying to hook up the power drive 1 to it. The point doesn't match up. I need to get a diagram for the power drive. Any suggestions.

    Thank you
    Ruben

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,631,820,572.91420 seconds with 12 queries