Results 1 to 3 of 3

Thread: Weldpack100 wire feed problem

  1. #1
    Join Date
    Sep 2021
    Posts
    1
    Post Thanks / Like

    Weldpack100 wire feed problem

    My WP100 stopped feeding on the high voltage setting (D of A-D). All lower voltage settings feed wire and weld fine. Any ideas where to start isolating this?

  2. #2
    Join Date
    Apr 2020
    Posts
    61
    Post Thanks / Like

    Re: Weldpack100 wire feed problem

    i have a weldpac 125hd, about 7 years old , in good shape, mine kinda does the same thing , mine just stopped working one day when i was changing the wire, when i press the trigger i just hear the breaker clicking and no drive roller working , doesnt matter what setting i have it on , if people chime in then we'll both no the problem.

  3. #3
    Join Date
    Apr 2020
    Posts
    61
    Post Thanks / Like

    Re: Weldpack100 wire feed problem

    i ordered an new circuit board for my welder, after i checked the switches and everything else i could possibly check. when i get it in i'll keep you posted on my progress,

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,642,820,700.29794 seconds with 13 queries