Results 1 to 14 of 14

Thread: (4) Binzel-style 2.5m (8ft) MIG guns w/10k pot on-handle for remote amp adjustment

  1. #1
    Join Date
    Jun 2012
    Location
    Laredo, Tx
    Posts
    6,661
    Post Thanks / Like

    (4) Binzel-style 2.5m (8ft) MIG guns w/10k pot on-handle for remote amp adjustment

    I thought I was going to use these for a project; not gonna happen so letting them go.

    $240 ea shipped in the US via Large PM. (usually a remote amperage control alone from CK sells for ~$200 a piece; this one has it built-in).

    Red teflon liner, perfect for aluminum welding. The short lead will help with feedability. The built-in rotary 10k pot can be used for on-the-fly adjustments if your welding machine supports it. Uses standard binzel style MK24KD front end parts. Back end is standard Euro Connector. I don't know why it says "CO2 welding cable". It's the same size as a standard 200-220A MIG gun.











    1st on WeldingWeb to have a scrolling sig!



  2. #2
    Join Date
    Jun 2012
    Location
    Laredo, Tx
    Posts
    6,661
    Post Thanks / Like

    Re: (4) Binzel-style 2.5m (8ft) MIG guns w/10k pot on-handle for remote amp adjustmen

    Make offers.
    1st on WeldingWeb to have a scrolling sig!



  3. #3
    Join Date
    Jun 2012
    Location
    Laredo, Tx
    Posts
    6,661
    Post Thanks / Like

    Re: (4) Binzel-style 2.5m (8ft) MIG guns w/10k pot on-handle for remote amp adjustmen

    $215 shipped each.
    1st on WeldingWeb to have a scrolling sig!



  4. #4
    Join Date
    Jun 2012
    Location
    Laredo, Tx
    Posts
    6,661
    Post Thanks / Like

    Re: (4) Binzel-style 2.5m (8ft) MIG guns w/10k pot on-handle for remote amp adjustmen

    $199.95 ea shipped USPM in the US
    1st on WeldingWeb to have a scrolling sig!



  5. #5
    Join Date
    Jun 2012
    Location
    Laredo, Tx
    Posts
    6,661
    Post Thanks / Like

    Re: (4) Binzel-style 2.5m (8ft) MIG guns w/10k pot on-handle for remote amp adjustmen

    189.95 as shipped in the US via Priority Mail.
    1st on WeldingWeb to have a scrolling sig!



  6. #6
    Join Date
    Jun 2012
    Location
    Laredo, Tx
    Posts
    6,661
    Post Thanks / Like

    Re: (4) Binzel-style 2.5m (8ft) MIG guns w/10k pot on-handle for remote amp adjustmen

    Bump.
    1st on WeldingWeb to have a scrolling sig!



  7. #7
    Join Date
    Oct 2016
    Posts
    418
    Post Thanks / Like

    Re: (4) Binzel-style 2.5m (8ft) MIG guns w/10k pot on-handle for remote amp adjustmen

    Quote Originally Posted by Oscar View Post
    Bump.
    Oscar is this one of the ones we spoke about earlier (on the knock off MIG thread) that will work with the PP220 HTP?

    If so I will buy one.
    Last edited by 455dan; 02-22-2022 at 05:07 PM.
    HTP Pro Pulse 220 MTS (Anniversary Edition)
    1962 Idealarc TIG 300 300
    1974 Idealarc TIG 300 300
    1988 HF Power MIG 150
    2015 Lotos Ltpdc2000d plasma/Stick/TIG
    Victor 100 torch, 200- 210 Oxy/Acet gauges

  8. #8
    Join Date
    Jun 2012
    Location
    Laredo, Tx
    Posts
    6,661
    Post Thanks / Like

    Re: (4) Binzel-style 2.5m (8ft) MIG guns w/10k pot on-handle for remote amp adjustmen

    yes, but the wires don't have a plug because wasn't spec'd out for the 14-pin plug that the HTP's use, it just has the 3-wires since it was made for more of a "universal" type of setup. I can order a plug and solder it up no problem. They run about $15 on Ebay so let me know if you're still interested.
    1st on WeldingWeb to have a scrolling sig!



  9. #9
    Join Date
    Nov 2013
    Posts
    638
    Post Thanks / Like

    Re: (4) Binzel-style 2.5m (8ft) MIG guns w/10k pot on-handle for remote amp adjustmen

    Yea,,, I'm gonna pull the trigger on one of these too...

    I need a smaller torch (other than the Alum 26 my PP220 came with) for some SilBr I want to try but wasn't sure that the Amp Control would be all that useful. Talked to my Body Shop buddy and he said that his machine, that he got specifically to do SilBr, had control on it and he does use it sometimes.

    So, I'm in!

  10. #10
    Join Date
    Jun 2012
    Location
    Laredo, Tx
    Posts
    6,661
    Post Thanks / Like

    Re: (4) Binzel-style 2.5m (8ft) MIG guns w/10k pot on-handle for remote amp adjustmen

    Sounds good.
    1st on WeldingWeb to have a scrolling sig!



  11. #11
    Join Date
    Oct 2016
    Posts
    418
    Post Thanks / Like

    Re: (4) Binzel-style 2.5m (8ft) MIG guns w/10k pot on-handle for remote amp adjustmen

    Quote Originally Posted by BaTu View Post
    Yea,,, I'm gonna pull the trigger on one of these too...

    I need a smaller torch (other than the Alum 26 my PP220 came with) for some SilBr I want to try but wasn't sure that the Amp Control would be all that useful. Talked to my Body Shop buddy and he said that his machine, that he got specifically to do SilBr, had control on it and he does use it sometimes.

    So, I'm in!


    Great Ok Sooo...

    I guess we just need an "all in price" for HTP Pro Pulse 220 MTS Mod Version

    For the torch, 14 pin connector installed, shipping,

    and of course how to get payment to Oscar
    HTP Pro Pulse 220 MTS (Anniversary Edition)
    1962 Idealarc TIG 300 300
    1974 Idealarc TIG 300 300
    1988 HF Power MIG 150
    2015 Lotos Ltpdc2000d plasma/Stick/TIG
    Victor 100 torch, 200- 210 Oxy/Acet gauges

  12. #12
    Join Date
    Jun 2012
    Location
    Laredo, Tx
    Posts
    6,661
    Post Thanks / Like

    Re: (4) Binzel-style 2.5m (8ft) MIG guns w/10k pot on-handle for remote amp adjustmen

    Just an extra $15 for the 14-pin plug, that's it. $204.95 including shipping. I'll PM you my Paypal email if that is what you use.


    Also as an update. I thought I had 4. I only have 3 of the 24-series. The other two are 36-series (much beefier) that use the larger 8mm front-end parts and bigger nozzles, as well as being a 320A gun. Also with the integrated rotary amp control. Same price either or. I was gonna keep the 36 MIG guns for another project, but that isn't gonna happen either, hence the sale.






    1st on WeldingWeb to have a scrolling sig!



  13. #13
    Join Date
    Jun 2012
    Location
    Laredo, Tx
    Posts
    6,661
    Post Thanks / Like

    Re: (4) Binzel-style 2.5m (8ft) MIG guns w/10k pot on-handle for remote amp adjustmen

    MIG guns both tested and shipped.

    Who else wants one before they're gone? The 10k potentiometer value can be altered using a network of series/parallel resistors in case anyone is wondering.
    Last edited by Oscar; 02-26-2022 at 12:18 PM.
    1st on WeldingWeb to have a scrolling sig!



  14. #14
    Join Date
    Jun 2012
    Location
    Laredo, Tx
    Posts
    6,661
    Post Thanks / Like

    Re: (4) Binzel-style 2.5m (8ft) MIG guns w/10k pot on-handle for remote amp adjustmen

    Bump.
    1st on WeldingWeb to have a scrolling sig!



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,664,384,792.48782 seconds with 11 queries