ReplyMake offers.
Supporting Vendor
I thought I was going to use these for a project; not gonna happen so letting them go.
$240 ea shipped in the US via Large PM. (usually a remote amperage control alone from CK sells for ~$200 a piece; this one has it built-in).
Red teflon liner, perfect for aluminum welding. The short lead will help with feedability. The built-in rotary 10k pot can be used for on-the-fly adjustments if your welding machine supports it. Uses standard binzel style MK24KD front end parts. Back end is standard Euro Connector. I don't know why it says "CO2 welding cable". It's the same size as a standard 200-220A MIG gun.
Supporting Vendor
Make offers.
Supporting Vendor
$215 shipped each.
Supporting Vendor
$199.95 ea shipped USPM in the US
Supporting Vendor
189.95 as shipped in the US via Priority Mail.
Supporting Vendor
Bump.
WeldingWeb Tradesman
Oscar is this one of the ones we spoke about earlier (on the knock off MIG thread) that will work with the PP220 HTP?Originally Posted by Oscar
If so I will buy one.
Last edited by 455dan; 02-22-2022 at 05:07 PM.
HTP Pro Pulse 220 MTS (Anniversary Edition)
1962 Idealarc TIG 300 300
1974 Idealarc TIG 300 300
1988 HF Power MIG 150
2015 Lotos Ltpdc2000d plasma/Stick/TIG
Victor 100 torch, 200- 210 Oxy/Acet gauges
Supporting Vendor
yes, but the wires don't have a plug because wasn't spec'd out for the 14-pin plug that the HTP's use, it just has the 3-wires since it was made for more of a "universal" type of setup. I can order a plug and solder it up no problem. They run about $15 on Ebay so let me know if you're still interested.
WeldingWeb Foreman
Yea,,, I'm gonna pull the trigger on one of these too...
I need a smaller torch (other than the Alum 26 my PP220 came with) for some SilBr I want to try but wasn't sure that the Amp Control would be all that useful. Talked to my Body Shop buddy and he said that his machine, that he got specifically to do SilBr, had control on it and he does use it sometimes.
So, I'm in!
Supporting Vendor
Sounds good.
WeldingWeb Tradesman
Yea,,, I'm gonna pull the trigger on one of these too...
I need a smaller torch (other than the Alum 26 my PP220 came with) for some SilBr I want to try but wasn't sure that the Amp Control would be all that useful. Talked to my Body Shop buddy and he said that his machine, that he got specifically to do SilBr, had control on it and he does use it sometimes.
So, I'm in!
GreatOk Sooo...
I guess we just need an "all in price" for HTP Pro Pulse 220 MTS Mod Version
For the torch, 14 pin connector installed, shipping,
and of course how to get payment to Oscar
HTP Pro Pulse 220 MTS (Anniversary Edition)
1962 Idealarc TIG 300 300
1974 Idealarc TIG 300 300
1988 HF Power MIG 150
2015 Lotos Ltpdc2000d plasma/Stick/TIG
Victor 100 torch, 200- 210 Oxy/Acet gauges
Supporting Vendor
Just an extra $15 for the 14-pin plug, that's it. $204.95 including shipping. I'll PM you my Paypal email if that is what you use.
Also as an update. I thought I had 4. I only have 3 of the 24-series. The other two are 36-series (much beefier) that use the larger 8mm front-end parts and bigger nozzles, as well as being a 320A gun. Also with the integrated rotary amp control. Same price either or. I was gonna keep the 36 MIG guns for another project, but that isn't gonna happen either, hence the sale.
Supporting Vendor
MIG guns both tested and shipped.
Who else wants one before they're gone?The 10k potentiometer value can be altered using a network of series/parallel resistors in case anyone is wondering.
Last edited by Oscar; 02-26-2022 at 12:18 PM.
Supporting Vendor
Bump.
Supporting Vendor
Bump still have some available
Posting Permissions