Results 1 to 3 of 3

Thread: (4) Binzel-style 2.5m (8ft) MIG guns w/10k pot on-handle for remote amp adjustment

  1. #1
    Join Date
    Jun 2012
    Location
    Laredo, Tx
    Posts
    5,864
    Post Thanks / Like

    (4) Binzel-style 2.5m (8ft) MIG guns w/10k pot on-handle for remote amp adjustment

    I thought I was going to use these for a project; not gonna happen so letting them go.

    $240 ea shipped in the US via Large PM. (usually a remote amperage control alone from CK sells for ~$200 a piece; this one has it built-in).

    Red teflon liner, perfect for aluminum welding. The short lead will help with feedability. The built-in rotary 10k pot can be used for on-the-fly adjustments if your welding machine supports it. Uses standard binzel style MK24KD front end parts. Back end is standard Euro Connector. I don't know why it says "CO2 welding cable". It's the same size as a standard 200-220A MIG gun.











    1st on WeldingWeb to have a scrolling sig!



  2. #2
    Join Date
    Jun 2012
    Location
    Laredo, Tx
    Posts
    5,864
    Post Thanks / Like

    Re: (4) Binzel-style 2.5m (8ft) MIG guns w/10k pot on-handle for remote amp adjustmen

    Make offers.
    1st on WeldingWeb to have a scrolling sig!



  3. #3
    Join Date
    Jun 2012
    Location
    Laredo, Tx
    Posts
    5,864
    Post Thanks / Like

    Re: (4) Binzel-style 2.5m (8ft) MIG guns w/10k pot on-handle for remote amp adjustmen

    $215 shipped each.
    1st on WeldingWeb to have a scrolling sig!



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,634,905,175.55707 seconds with 13 queries