Small Shop Guys What is a tool you use frequently that is out of the norm

[Meltedmetal]

I have the same problem with my Klingspoor 1/2"x24" belts.

My own fault for buying a big *** box of them off eBay. The adhesive bond let's go on them.


Sent from my iPhone using Tapatalk

I had some 3" ones come unglued. I used por 15 to re-glue them in a jig I have to keep band saw blades aligned for silver soldering. It worked okay.

[Lis2323]

I had some 3" ones come unglued. I used por 15 to re-glue them in a jig I have to keep band saw blades aligned for silver soldering. It worked okay.

Isn't that a rust encapsulator? Works okay as an adhesive?


Sent from my iPhone using Tapatalk

[Meltedmetal]

Isn't that a rust encapsulator? Works okay as an adhesive?



Sent from my iPhone using Tapatalk

Yup. In that application. Once it is cured it is nearly impossible to get it off anything including your hands. I also used it to seal the holes in an oil pan that was rusted though. Not big holes just pin holes. It worked okay for that too for a while.

[N2 Welding]

Assistant or first aid attendant ....




Sent from my iPhone using Tapatalk

I sure could use her A$$-is-trance right about now!