Results 1 to 2 of 2

Thread: A Storm is almost here: Storm 215C, MIG, Stick and Plasma

  1. #1
    Join Date
    Nov 2008
    Location
    south GA where its hot in summer and cold in winter
    Posts
    5,121
    Post Thanks / Like

    A Storm is almost here: Storm 215C, MIG, Stick and Plasma

    The all new storm is almost here. Should be here by end of November. PM me if you want one. They are nearly sold out for this shipment.

    Here are the basics:
    Advanced PowerSet (Synergic mode) for guess-less setup and use
    Digital display with easy to read volt/amp display
    MIG=200A
    Stick=160A
    Plasma=40A
    All at 35% duty cycle at max output.
    It is also dual voltage for 120/240V requirements




    Here is a overview video of the new machine

    Esab Migmaster 250
    Lincoln SA 200
    Lincoln Ranger 8
    Smith Oxy Fuel setup
    Everlast PowerPlasma 80
    Everlast Power iMIG 160
    Everlast Power iMIG 205
    Everlast Power iMIG 140E
    Everlast PowerARC 300
    Everlast PowerARC 140ST
    Everlast PowerTIG 255EXT

  2. #2
    Join Date
    Nov 2008
    Location
    south GA where its hot in summer and cold in winter
    Posts
    5,121
    Post Thanks / Like

    Re: A Storm is almost here: Storm 215C, MIG, Stick and Plasma

    Here is another look at the new Storm 215C.
    Esab Migmaster 250
    Lincoln SA 200
    Lincoln Ranger 8
    Smith Oxy Fuel setup
    Everlast PowerPlasma 80
    Everlast Power iMIG 160
    Everlast Power iMIG 205
    Everlast Power iMIG 140E
    Everlast PowerARC 300
    Everlast PowerARC 140ST
    Everlast PowerTIG 255EXT

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,638,020,817.15997 seconds with 13 queries