Results 1 to 6 of 6

Thread: Cyclomatic wire feeder to smt 400

  1. #1
    Join Date
    Oct 2021
    Posts
    8
    Post Thanks / Like

    Cyclomatic wire feeder to smt 400

    I got a smt 400 and a cyclomatic power drive too the wire feeder unit I don't believe it has the original cable that goes to the pinout it's got a seven wire system that comes down to alligator clips was told that it was used to hook to a Lincoln idle arc does anybody have a wiring diagram or know how to wire a new wire inside the cyclomatic power drive I have the smt 400 owners manual so I know where it needs to get connected on the power unit but where it needs to go in the wire feeder I have no idea help would be much appreciated.

    Cheers Justin

  2. #2
    Join Date
    Mar 2010
    Location
    Ceres, California
    Posts
    4,034
    Post Thanks / Like

    Re: Cyclomatic wire feeder to smt 400

    Post a picture of the power drive. see if it is Type 1 or type 2
    Then I can check the archives.

  3. #3
    Join Date
    Oct 2021
    Posts
    8
    Post Thanks / Like

    Re: Cyclomatic wire feeder to smt 400

    It's a power drive 2
    Last edited by Justinjt; 12-05-2021 at 11:23 AM. Reason: Worded wrong

  4. #4
    Join Date
    Oct 2021
    Posts
    8
    Post Thanks / Like

    Re: Cyclomatic wire feeder to smt 400

    Name:  IMG_20211205_102232782.jpg
Views: 124
Size:  75.2 KB

  5. #5
    Join Date
    Oct 2021
    Posts
    8
    Post Thanks / Like

    Re: Cyclomatic wire feeder to smt 400

    Not even sure it has the correct wire looks like semi truck wire to me

  6. #6
    Join Date
    Mar 2010
    Location
    Ceres, California
    Posts
    4,034
    Post Thanks / Like

    Re: Cyclomatic wire feeder to smt 400

    send me your email by private message. just click on my name. short cut to private messages. Just have to scan in the power drive 2 manual. to large to post here.
    will scan when you respond.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,664,797,550.97182 seconds with 14 queries