Post a picture of the power drive. see if it is Type 1 or type 2
Then I can check the archives.
I got a smt 400 and a cyclomatic power drive too the wire feeder unit I don't believe it has the original cable that goes to the pinout it's got a seven wire system that comes down to alligator clips was told that it was used to hook to a Lincoln idle arc does anybody have a wiring diagram or know how to wire a new wire inside the cyclomatic power drive I have the smt 400 owners manual so I know where it needs to get connected on the power unit but where it needs to go in the wire feeder I have no idea help would be much appreciated.
Cheers Justin
Post a picture of the power drive. see if it is Type 1 or type 2
Then I can check the archives.
It's a power drive 2
Last edited by Justinjt; 12-05-2021 at 11:23 AM. Reason: Worded wrong
Not even sure it has the correct wire looks like semi truck wire to me
send me your email by private message. just click on my name. short cut to private messages. Just have to scan in the power drive 2 manual. to large to post here.
will scan when you respond.