Nice Bandsaw Solution

[farmersammm]

I recently spun another part in the saw, and I've been determined to set the vise up to handle small parts. I know there's a lot of ideas out there,, but I really like this one, and intend to do the same.

[M J D]

Wrapping a wrap or 2 of duct tape does wonders on short pieces. I use scraps or 1-2-3 blocks and shims if needed to block the opposite side of the vise.

[davec]

I use another piece of the same or similar size stock at the far end of the vise.

[tapwelder]

I keep a piece if 6" pipe (split in half) next to my saw. Simple.

[tapwelder]

Fixture

[VaughnT]

Gotta love the BD1 bandaw bridge clamp, "invented" by our very own BD1 and saving metal wranglers untold amounts of frustration since 1852.... or thereabouts!