Results 1 to 5 of 5

Thread: Need a wiring diagram for SAE generators

  1. #1
    Join Date
    Aug 2021
    Posts
    27
    Post Thanks / Like

    Need a wiring diagram for SAE generators

    Hello everyone,

    I have successfully re-insulated the wiring in my SAE-600. But I'm not sure if it was hooked up right when I bought it plus there's always the chance that I got something wrong. I want to check the current wiring against a wiring diagram for the generator.

    Does anybody have a detailed wiring diagram for an SAE-600? The only ones I've found have been heavy on details for engine wiring and pretty vague about the generator internals

  2. #2
    Join Date
    Mar 2010
    Location
    Ceres, California
    Posts
    3,979
    Post Thanks / Like

    Re: Need a wiring diagram for SAE generators

    If you can find the serial number and code numbers, call Lincoln they might still be able to send you something. If the serial number/ code plate is gone. check the barrel of the generator is might be stamped on it some where.

  3. #3
    Join Date
    Aug 2021
    Posts
    27
    Post Thanks / Like

    Re: Need a wiring diagram for SAE generators

    Lincoln eventually came through with the right wiring diagram for this machine. It was wired correctly and is now welding again

  4. #4
    Join Date
    Mar 2015
    Posts
    259
    Post Thanks / Like

    Re: Need a wiring diagram for SAE generators

    You ever turn it up and run some big rod ?

  5. #5
    Join Date
    Aug 2021
    Posts
    27
    Post Thanks / Like

    Re: Need a wiring diagram for SAE generators

    Not yet, unfortunately. I need some very expensive cable, hardware, and electrodes to do that

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,643,251,798.69857 seconds with 13 queries