Results 1 to 6 of 6

Thread: Amico MIG-130A

  1. #1
    Join Date
    Jan 2022
    Posts
    1
    Post Thanks / Like

    Amico MIG-130A

    Does anyone have any firsthand info on this machine? Good or bad.

  2. #2
    Join Date
    Oct 2005
    Location
    Fillmore,NY
    Posts
    32
    Post Thanks / Like

    Re: Amico MIG-130A

    I have amco mig-200 for year or so, nice welder ~~no problems, worth every penny!
    Bob Fillmore NY
    Thermal Arc T-Bird 270 Amp gas welder
    Thermal Arc Pro Wave 185
    PowerArc 200
    Riland 60 Plasma
    Miller suitcase 12vs wire feeder,
    180 Amp Diesel Welder Gen
    Ellis 1600 bandsaw
    Imig 205 Mig,Eastwood 250 mig
    Lincoln 250 G9 Pro gas Weldanpower

  3. #3
    Join Date
    Mar 2018
    Location
    Clovis California
    Posts
    4,048
    Post Thanks / Like

    Re: Amico MIG-130A

    Looks good the one I look at had 120/240 volt.
    Note I would only use 0.030" [0.8mm] wire size on small welders.

    Dave

    Quote Originally Posted by Chiefcook View Post
    Does anyone have any firsthand info on this machine? Good or bad.

  4. #4
    Join Date
    Mar 2018
    Location
    Clovis California
    Posts
    4,048
    Post Thanks / Like

    Re: Amico MIG-130A

    You can come by 240 volts from your dryer plug.

    Dave

    Quote Originally Posted by Chiefcook View Post
    Does anyone have any firsthand info on this machine? Good or bad.

  5. #5
    Join Date
    Jan 2009
    Location
    Sonoma County
    Posts
    948
    Post Thanks / Like

    Re: Amico MIG-130A

    I bought one in December. I like it.

    Here's a thread I posted on WeldingSite. My recent post shows a test of welding then bending 1/8" material. It did a nice job. The welds were solid after bending the material 90 degrees.
    * Amico MIG-130A Flux, Dual Voltage. Truly portable!
    * HF MIG-180 with all the mods. Heavy.
    * Grizzly H8153 Stick/Tig 130/160.
    * Wards PowrKraft AC-230. Stick & carbon arc.

  6. #6
    Join Date
    Mar 2018
    Location
    Clovis California
    Posts
    4,048
    Post Thanks / Like

    Re: Amico MIG-130A

    Nice review 👌

    I wish I could see the schematic.

    Dave

    Quote Originally Posted by California View Post
    I bought one in December. I like it.

    Here's a thread I posted on WeldingSite. My recent post shows a test of welding then bending 1/8" material. It did a nice job. The welds were solid after bending the material 90 degrees.

  7. Likes California liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,642,619,722.51345 seconds with 13 queries