-
Client Equipment
@Sberry and I were discussing bigger shop welders so today during my break I took some pics of what they have on hand. I do not use any of their equipment only my own. I have been contracting full time there since May.
Now there are 4 Lincoln 250 GTX's mounted in trucks. But this is what happen to be in this shop.
Lincoln
330MPX
Lincoln Power Mig 256
Lincoln LN-25X Wire Feeder
Lincoln AC/DC 225
¼ Ton of Torches OFC-A/OFG-A
Air Carbon Arc Gouging CAC-A
Lincoln Tomahawk 1000
Ingersoll Rand T-30-14hp-25cfm
Instagram:
#Freebird Welds
-
-
Re: Client Equipment
Lincoln
330MPX
Lincoln Power Mig 256
Lincoln LN-25X Wire Feeder
Lincoln AC/DC 225
¼ Ton of Torches OFC-A/OFG-A
Air Carbon Arc Gouging CAC-A
Lincoln Tomahawk 1000
Ingersoll Rand T-30-14hp-25cfm
Instagram:
#Freebird Welds
-
Post Thanks / Like - 1 Likes, 0 Dislikes
-
Re: Client Equipment
Does any one use those machines?
-
Re: Client Equipment
Originally Posted by
Bob
Does any one use those machines?
Yes a couple guys who do there grinder repairs use them. But not as often as you would think.
Lincoln
330MPX
Lincoln Power Mig 256
Lincoln LN-25X Wire Feeder
Lincoln AC/DC 225
¼ Ton of Torches OFC-A/OFG-A
Air Carbon Arc Gouging CAC-A
Lincoln Tomahawk 1000
Ingersoll Rand T-30-14hp-25cfm
Instagram:
#Freebird Welds
-
Re: Client Equipment
I have a 300 synch and the plasma cutter, mine broke and I havnt fixed, I bought a new one. But I would me tempted to quietly commandeer that red 400.
-
Post Thanks / Like - 1 Likes, 0 Dislikes
-
Re: Client Equipment
Must either be a good neighborhood, or they have a pack of guard dogs. I'd be nervous having all that stuff around with such large windows for people to see what's in the shop.
-
Re: Client Equipment
Originally Posted by
farmersammm
Must either be a good neighborhood, or they have a pack of guard dogs. I'd be nervous having all that stuff around with such large windows for people to see what's in the shop.
The windows have bars on them. But in this community (area) you can still leave your keys in your vehicle. Not a lot of theft around here mainly the people plus you can get shot. 
Lincoln
330MPX
Lincoln Power Mig 256
Lincoln LN-25X Wire Feeder
Lincoln AC/DC 225
¼ Ton of Torches OFC-A/OFG-A
Air Carbon Arc Gouging CAC-A
Lincoln Tomahawk 1000
Ingersoll Rand T-30-14hp-25cfm
Instagram:
#Freebird Welds
-
Re: Client Equipment
I might be tempted to roll the big power supply to yoiur side if no one looked like they cared and if it came up might have a lie,,,, er story ready to tell. Would they rather pay you to fuel a welder or pay you to weld? Wouldnt be skin off them and would save you a pocket full.
-
Post Thanks / Like - 1 Likes, 0 Dislikes
-
Re: Client Equipment
Originally Posted by
Freebirdwelds
em. But in this community (area) you can still leave your keys in your vehicle. Not a lot of theft around here mainly the people plus you can get shot.
, when i was a kid, we lived/farmed near a prison. my mom insisted keys to be left in the vehicles, that way, an escapee, could take the vehicle, w/o coming in the house wanting keys. escapees would sometimes hide in our corn. the guards would setup at corners of fields/patch, and wait them out. either the smell of corn was to strong for the dogs to sniff the prisoners, or the guards just didnt want to go in. but it gets hot in corn (real hot), and having no water too drink, they usually came out in a couple days
-
Post Thanks / Like - 1 Likes, 0 Dislikes
WeldingWeb Craftsman
whtbaron liked this post
WeldingWeb Artisan
Reply