Miller Synchrowave 300 and Spoolmatic 30A

[+p+]

I recently bought a welder at auction and realized that it is way too big for my garage and needs.

I do not know the value of this machine, so if I am way out of line, please feel free to make an offer.

I am storing this at a friends farm, so I do not have a way to connect it for you to test. I am willing to go over and take more pictures of anything specific you may need to see in more detail.

Location is Batavia, IL 60510

MILLER SYNCROWAVE 300 STICK/TIG MACHINE. $2500obo

Comes with:
BERNARD Water Cooler for TIG torch (Fully Functioning)
TIG TORCH
Foot Control (Pedal)
Regulator
All Hoses
25 Ft Ground lead/Clamp
25 Ft Torch LeadsWith Pulse Control
Metal rolling cart with stand for two Argon bottles

200/230/460 VOLTSSINGLE PHASE----YES It will work with standard 220v home wiring, though Amperage is limited by your electrical service---

I also have a Miller Spoolmatic 30A - Aluminum spool gun (25ft leads) I will sell with it for an additional $1200. (Part # 130831) and an additional Miller Foot Control Pedal (RFCS-14) for an additional $150. ***SEE PICS***

This welder came from a well known local metal fab shop, and works perfectly. The owner of the business decided to retire and sell the business, and sold off all of his tools. I was lucky enough to get this welder, but although I would LOVE to keep it and use it, I have no room for it in my small garage. I did test the machine before I purchased it, and it works beautifully.

You can TIG weld all day with this machine, and not run into a duty cycle issue. With the water cooled torch, your torch hand stays cool and you can keep on laying those beads. For an enthusiast, it may be overkill but you will not find its limitations. For the production line, this welder will keep you pumping out work quickly and efficiently.

I will accept cash in person, will not ship, and I do not need help selling it. I do have a forklift available to help load if needed. I recommend bringing a small trailer to haul it, but it will fit in an 8ft truck bed, or large van.













More pics will be posted below...

[+p+]

[+p+]

[+p+]

[+p+]

[smithdoor]

Looks great 👍
Now just park the wife's car outside 😳.

I had same problem I purchased a smaller welder and sold the big one.

Wife's car comes first not the welder per my wife.

Dave

I recently bought a welder at auction and realized that it is way too big for my garage and needs.

I do not know the value of this machine, so if I am way out of line, please feel free to make an offer.

I am storing this at a friends farm, so I do not have a way to connect it for you to test. I am willing to go over and take more pictures of anything specific you may need to see in more detail.

Location is Batavia, IL 60510

MILLER SYNCROWAVE 300 STICK/TIG MACHINE. $2500obo

Comes with:
BERNARD Water Cooler for TIG torch (Fully Functioning)
TIG TORCH
Foot Control (Pedal)
Regulator
All Hoses
25 Ft Ground lead/Clamp
25 Ft Torch LeadsWith Pulse Control
Metal rolling cart with stand for two Argon bottles

200/230/460 VOLTSSINGLE PHASE----YES It will work with standard 220v home wiring, though Amperage is limited by your electrical service---

I also have a Miller Spoolmatic 30A - Aluminum spool gun (25ft leads) I will sell with it for an additional $1200. (Part # 130831) and an additional Miller Foot Control Pedal (RFCS-14) for an additional $150. ***SEE PICS***

This welder came from a well known local metal fab shop, and works perfectly. The owner of the business decided to retire and sell the business, and sold off all of his tools. I was lucky enough to get this welder, but although I would LOVE to keep it and use it, I have no room for it in my small garage. I did test the machine before I purchased it, and it works beautifully.

You can TIG weld all day with this machine, and not run into a duty cycle issue. With the water cooled torch, your torch hand stays cool and you can keep on laying those beads. For an enthusiast, it may be overkill but you will not find its limitations. For the production line, this welder will keep you pumping out work quickly and efficiently.

I will accept cash in person, will not ship, and I do not need help selling it. I do have a forklift available to help load if needed. I recommend bringing a small trailer to haul it, but it will fit in an 8ft truck bed, or large van.













More pics will be posted below...

[+p+]

Looks great 👍
Now just park the wife's car outside 😳.

I had same problem I purchased a smaller welder and sold the big one.

Wife's car comes first not the welder per my wife.

Dave

I have a two-car garage, and the corvette permanently resides in one stall, and the race truck build is in the other (can't stay outside with no windows!). The wife has been parking outside for 4 years now, and only really complains during the winter.

The only real solution is to buy a house with a bigger shop...

[smithdoor]

I built a shop in backyard for some tools.
If live California you build 120 sqft without a permit and next to property line. If need be build 2 or more.

Also in California I can work outside and built a carport for my pickup so wife car can part in the garage.
Remember happy wife happy life only took me 20 years.

Dave

I have a two-car garage, and the corvette permanently resides in one stall, and the race truck build is in the other (can't stay outside with no windows!). The wife has been parking outside for 4 years now, and only really complains during the winter.

The only real solution is to buy a house with a bigger shop...

[+p+]

I have dropped the price. $1750 obo. Bump to the top.