Wtb Mig gun to fit Lincoln Idealarc 250 dc welder with Ln7 feeder

[Jimmy16]

Wtb mig gun for Lincoln Idealarc 250 dc welder using Ln7 feeder

[Louie1961]

So you actually want to buy a gun for the LN7. The welder you use to run the LN7 doesn't matter. Look here https://usaweld.com/collections/LINC...TP_Replacement

[Lis2323]

Realistically (and sadly) the person most likely to accommodate you would be the original owner of the LN7’s. He has three of them……probably “disconnected” with cutoff wheel.


Sent from my iPad using Tapatalk

[Stick-man]

Also, I believe the Idealarc 250 is a CC (constant current) welder. Not a very good choice to pair with a feeder. I apologize if I am mistaken.