Correct 90 degree fitting for H 190 shielding gas line?

[abosely]

Is this the correct 90 degree fitting to thread into shielding gas fitting on back of H 190 that stock gas line fitting to screw into?
#AW-407, CGA 032 Nut/NIP - 032 Body 90'

Sorry, meant for the pic to be thumbnail


I want to put 90 degree elbow on back of H 190 shielding for gas line and be able to thread the stock/original line fitting into the elbow.

Wanted to double check this is correct fitting. :-)

Cheers, Allen

[danielplace]

CGA 032 is 5/8-18 so I would say it is the correct 90° almost certainly.

https://www.concoa.com/cgachart.html

[Rondo]

Is this the correct 90 degree fitting to thread into shielding gas fitting on back of H 190 that stock gas line fitting to screw into?
#AW-407, CGA 032 Nut/NIP - 032 Body 90'

Sorry, meant for the pic to be thumbnail


I want to put 90 degree elbow on back of H 190 shielding for gas line and be able to thread the stock/original line fitting into the elbow.

Wanted to double check this is correct fitting. :-)

Cheers, Allen

Yes, That one is correct.

[abosely]

Thanks guys, ordered it and it fits/works. :-)