Results 1 to 9 of 9

Thread: Need Year and opinion of good or not great on SA 200 F-163

  1. #1
    Join Date
    May 2022
    Posts
    5
    Post Thanks / Like

    Need Year and opinion of good or not great on SA 200 F-163

    I think 1973 or 74
    Attached Images Attached Images   

  2. #2
    Join Date
    May 2022
    Posts
    5
    Post Thanks / Like

    Re: Need Year and opinion of good or not great on SA 200 F-163

    I can see I did this wrong. Mr. Administrator please remove this post and I will post in the right place.

  3. #3
    Join Date
    May 2022
    Posts
    5
    Post Thanks / Like

    Re: Need Year and opinion of good or not great on SA 200 F-163

    ...Remove Thread

  4. #4
    Join Date
    May 2007
    Posts
    3,914
    Post Thanks / Like

    Re: Need Year and opinion of good or not great on SA 200 F-163

    the administrator(s) are busy. dont worry about it, welders are used to seeing things sideways. and every which way, all day long

  5. #5
    Join Date
    Dec 2007
    Location
    Los Angeles
    Posts
    8,462
    Post Thanks / Like

    Re: Need Year and opinion of good or not great on SA 200 F-163

    Name:  706DD773-9558-49FC-9997-8838E087AE28.jpg
Views: 98
Size:  134.5 KB


    Name:  13FAB096-3086-4908-B59A-081DD77E7CEC.jpg
Views: 99
Size:  96.4 KB


    should be correct now
    Ed Conley
    http://www.screamingbroccoli.com/
    MM252
    MM211 (Sold)
    Passport Plus & Spool gun
    Lincoln SP135 Plus- (Gone to a good home)
    Klutch 120v Plasma cutter
    SO 2020 bender
    Beer in the fridge

  6. #6
    Join Date
    Jan 2004
    Location
    Brethren, Mi
    Posts
    3,287
    Post Thanks / Like

    Re: Need Year and opinion of good or not great on SA 200 F-163

    Someone added Murphy to it. But,,, they year doesnt mean a lot,,, but good or great for what?

  7. #7
    Join Date
    May 2007
    Posts
    3,914
    Post Thanks / Like

    Re: Need Year and opinion of good or not great on SA 200 F-163

    Quote Originally Posted by Broccoli1 View Post
    Name:  706DD773-9558-49FC-9997-8838E087AE28.jpg
Views: 98
Size:  134.5 KB


    Name:  13FAB096-3086-4908-B59A-081DD77E7CEC.jpg
Views: 99
Size:  96.4 KB


    should be correct now
    they sent u a magician, instead of andministrator. ur coils might have some alum instead of copper, but all sa 200s are good - enjoy it

  8. #8
    Join Date
    May 2008
    Location
    Orange, TX
    Posts
    17,508
    Post Thanks / Like

    Re: Need Year and opinion of good or not great on SA 200 F-163

    If that SN is 705105 (or close) that would make the machine a late '72.

    If that code# is 7307, you can download the Operator Manual here:
    https://www.lincolnelectric.com/asse...oln3/im276.pdf
    MM200 w/Spoolmatic 1
    Syncrowave 180SD
    Bobcat 225G Plus - LP/NG
    MUTT Suitcase Wirefeeder
    WC-1S/Spoolmatic 1
    HF-251D-1
    PakMaster 100XL
    '68 Red Face Code #6633 project
    Star Jet 21-110

    Save Second Base!

  9. #9
    Join Date
    May 2007
    Posts
    3,914
    Post Thanks / Like

    Re: Need Year and opinion of good or not great on SA 200 F-163

    i got a code 7307 also. it was froze up when i got it, then i robbed a couple parts off it. it really came in handy, when i needed the commentator out of it. cuz, afterward i bought a code #6340 that didnt weld, but eng in fairly descent shape. finally w/ some phone help from lincoln, we figured it was the commentator bad. the commentator outa the 7307 was slightly larger dia, and 1 or 2 higher bar count if i remeber right. it barely cleared in the 6340, but it works fine. at the time, a new commentator for the 6340 was 800 bucks. i got the 6340 orig commentor stored away. i dont know if one of them many wires in it broke, or what gave way, or what it takes to fix. working on the elect end of things is always been hard for me to grasp/understand
    Last edited by 123weld; 05-20-2022 at 12:38 AM.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,656,516,539.14947 seconds with 14 queries