-
Re: Mobile Tube Bender Stand
Finally have it assembled getting close to paint
don’t know why my pictures turn sideways when I add them
Retired Old Guy
Hobart 210
Lincoln AC/DC 225/125
Evolution 14” Saw
-
-
Post Thanks / Like - 1 Likes, 0 Dislikes
-
Re: Mobile Tube Bender Stand
Just my luck took it outside to paint, it’s was only 100 today so it should dry well. About 30 minutes after the first coat. It started raining. Guess I get to do it again tomorrow.
Retired Old Guy
Hobart 210
Lincoln AC/DC 225/125
Evolution 14” Saw
-
Post Thanks / Like - 1 Likes, 0 Dislikes
-
Re: Mobile Tube Bender Stand
Ok let’s have a good laugh, painted the bottom side first, it rained on it 30 minutes later. This morning coated it again. Let it set about an hour. Turned it over, grabbed a new can of spray paint and it’s dead as a door nail. Full of paint no propellant. Well do have some green so I painted the top side in green.
Retired Old Guy
Hobart 210
Lincoln AC/DC 225/125
Evolution 14” Saw
-
Post Thanks / Like - 2 Likes, 0 Dislikes
-
Re: Mobile Tube Bender Stand
Long as it does what it's intended to do.......................F'k the paint, it's fine
-
Post Thanks / Like - 1 Likes, 0 Dislikes
-
Re: Mobile Tube Bender Stand
Originally Posted by
farmersammm
Long as it does what it's intended to do.......................F'k the paint, it's fine
No chance Sherwin Williams is callin' you up with a job offer in their ad department...
:
-
Post Thanks / Like - 2 Likes, 0 Dislikes
-
Re: Mobile Tube Bender Stand
Originally Posted by
Lis2323
No chance Sherwin Williams is callin' you up with a job offer in their ad department...
Rustoleum should call they owe $2.99 for a useless can
Retired Old Guy
Hobart 210
Lincoln AC/DC 225/125
Evolution 14” Saw
-
Post Thanks / Like - 1 Likes, 0 Dislikes
-
Re: Mobile Tube Bender Stand
Originally Posted by
NotaVegetarian
Rustoleum should call they owe $2.99 for a useless can
If you can get a class action suit going(assuming this is a trend), you might be able to sue WalMart for the dead can. Of course............you'll only get about 2 cents when the lawyers get done with ya.
-
Post Thanks / Like - 1 Likes, 0 Dislikes
-
Re: Mobile Tube Bender Stand
Originally Posted by
farmersammm
If you can get a class action suit going(assuming this is a trend), you might be able to sue WalMart for the dead can. Of course............you'll only get about 2 cents when the lawyers get done with ya.
Now that’s funny lol
Retired Old Guy
Hobart 210
Lincoln AC/DC 225/125
Evolution 14” Saw
-
Re: Mobile Tube Bender Stand
It'd be a gamble but I expect you'd get more than $0.02 these days. I got a check for $0.77 from the At&t suit. That's the class action in which At&t was mistakenly collecting tax that wasn't due. But after learning that, it kept the taxes rather than refund them. I expect I paid several thousand dollars in taxes I didn't owe. But, what the hey. lawyers gotta eat too. Just maybe not prime rib.
-
Re: Mobile Tube Bender Stand
Purchased this jack to power my tube bender, I’ve spent two hours bleeding the air off the pump and it won’t pump. Called them they didn’t say much about it and have sent me a new one. Here’s the one I ordered
https://www.northerntool.com/shop/to...1740_200641740
Retired Old Guy
Hobart 210
Lincoln AC/DC 225/125
Evolution 14” Saw
-
Re: Mobile Tube Bender Stand
Have it all ready for the new long ram air hydraulic jack.
wish I knew why the pictures turn
Retired Old Guy
Hobart 210
Lincoln AC/DC 225/125
Evolution 14” Saw
-
Post Thanks / Like - 2 Likes, 0 Dislikes
-
Re: Mobile Tube Bender Stand
Had to rotate to see it. Looks good.
Sent from my iPad using Tapatalk
:
-
Post Thanks / Like - 1 Likes, 0 Dislikes
-
Re: Mobile Tube Bender Stand
Thanks just wish that ram worked, messed with it for another 2 hours. Tried bleeding the hydraulics again finally got it to pump, could put my fingers on the end of the ram it was nowhere close to 8 tons can hold it with my finger. Just got a bad one, glad they are sending a new one.
Retired Old Guy
Hobart 210
Lincoln AC/DC 225/125
Evolution 14” Saw
-
Re: Mobile Tube Bender Stand
Looks like a nice setup. Hope the new jack works better. It sucks to buy something that's DOA.
-
Post Thanks / Like - 1 Likes, 0 Dislikes
-
Re: Mobile Tube Bender Stand
Stopped at lowes today to grab some stuff man the price of paint has tripled. A new can is $7.99.
Retired Old Guy
Hobart 210
Lincoln AC/DC 225/125
Evolution 14” Saw
-
Re: Mobile Tube Bender Stand
Originally Posted by
NotaVegetarian
Stopped at lowes today to grab some stuff man the price of paint has tripled. A new can is $7.99.
this should cheer you up.....
:
-
Re: Mobile Tube Bender Stand
I got ya beat. We bought 3 rattle cans of Duplicolor automotive paint for something like $80.
Edit: I think it was $80US. About $25 a can plus sales tax (5.5% I think)
Sent from my Lincoln Buzzbox using Tapatalk
Sent via smoke signals using my Lincoln buzzbox
-
Re: Mobile Tube Bender Stand
Yall have an entire McDonald's PARK?!
Sent from my Lincoln Buzzbox using Tapatalk
Sent via smoke signals using my Lincoln buzzbox
-
Post Thanks / Like - 1 Likes, 0 Dislikes
-
Re: Mobile Tube Bender Stand
:
-
Post Thanks / Like - 1 Likes, 0 Dislikes
-
Re: Mobile Tube Bender Stand
Originally Posted by
Lis2323
Yeah... yay me.
Sent from my Lincoln Buzzbox using Tapatalk
Sent via smoke signals using my Lincoln buzzbox
-
Re: Mobile Tube Bender Stand
Ouch! what if you ordered it from somewhere and got it shipped what issues would that bring? Down here they tack a $20 (us) fee for hazmat on gun powder and primers but Amazon and home depot still have free delivery on cases of spray paint
Retired Old Guy
Hobart 210
Lincoln AC/DC 225/125
Evolution 14” Saw
-
Re: Mobile Tube Bender Stand
New ram finally arrived put it in the vise and tested it. This one is pumping, will get it mounted tomorrow
Retired Old Guy
Hobart 210
Lincoln AC/DC 225/125
Evolution 14” Saw
-
Re: Mobile Tube Bender Stand
Whoohoo finally got it assembled and it works!
Retired Old Guy
Hobart 210
Lincoln AC/DC 225/125
Evolution 14” Saw
-
Post Thanks / Like - 2 Likes, 0 Dislikes