Results 1 to 17 of 17

Thread: Beating dented cabinet back into shape?

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Jun 2022
    Post Thanks / Like

    Beating dented cabinet back into shape?

    Picked up this used cabinet. The rear near the top has been dented in a bit. I took a couple of pics with flat bar so you can see how the rear at the top is pushed in, which caused top near the rear to bulge up.

    Plan is to add casters, put on a plywood top and make this a drill press stand for a 80lb drill press.

    I saw this video from sixtyfiveford where he welds a bolt to the dent and pulls the dent out. Link to video:

    I guess that's the best bet? If there's an easier method, I'm all ears.
    Last edited by goggins; 07-01-2022 at 10:41 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Page generated in 1,664,113,782.98372 seconds with 13 queries