Calling all Welding Students & Early Career Welders

[PaceCommunications]

The American Welding Society (AWS) is asking welding students and early career welders to share their experiences in a 10 minute survey. The survey is completely confidential and the information we collect will not be used for any direct marketing purposes.


Begin Survey

[NotaVegetarian]

Dont click the link it’s a scam

[PaceCommunications]

This is not a scam. AWS is our client and this is a legit survey they've asked us to share.

[Lis2323]

This is not a scam. .

So. Are you saying if it WAS a scam you would tell us so?


Sent from my iPad using Tapatalk

[albrightree]

Is this your website ?

[PaceCommunications]

Your response made me laugh. It's understandable you are skeptical. I'm not sure I can convince you otherwise but I'll say, the survey is intended to help better understand what early career welders need and want - so we (Pace Co) can create a better American Welding Society (AWS) website and experience. No pressure to take it.

[PaceCommunications]

Yes, that is our company website. You can email me at jason.kallas @ paceco .com and I'll email you back if you like.

[smithdoor]

I guess if you retire 🤷 the scamer does not want us.

Dave

Dont click the link it’s a scam

[CAVEMANN]

I did the survey, it was a lot o questions and IMO some were kind of cheesy.

[smithdoor]

Try this cheesy one HOW DO YOU LIKE TECH SUPPORT .
They did not have box for Did not know you had tech support and never need tech support

Dave

I did the survey, it was a lot o questions and IMO some were kind of cheesy.

[Freebirdwelds]

I did the survey, it was a lot o questions and IMO some were kind of cheesy.

oOoo I love cheese.

[Sberry]

They prolly want free beer and strippers. Maybe cheese too.

[John T]

They prolly want free beer and strippers. Maybe cheese too.

Strippers will provide the cheese.

Fromunder cheese.

[metalman21]

"If it smells like Provolone,...leave it alone".

Screw surveys. They show up on Youtube, "get free tools, fill out online survey" (junk) from whoever.

[NotaVegetarian]

Man I was looking forward to the strippers and beer ��

[Lis2323]

Man I was looking forward to the strippers and beer ��

I like to give a percentage of my earnings to Charity....

and other strippers...!


Sent from my iPad using Tapatalk

[John T]

Speaking of strippers I need a new pair.

Something that will handle very small wire like telephone or cat 5 wire

I put a new microphone cord on my CB radio last week and I must've cut one of the wires trying to strip them with a razor blade like an idiot.

Any suggestions on a small gauge wire stripper?

Haven't done any research yet

[CAVEMANN]

I have a screwdriver that has a stripper in the handle, I got it at RADIO SHACK about 25 years ago in a computer repair tool kit, it's my go-to for small wire, I also have a small pliers type that's adjustable that works ok, after you get it set right.

[smithdoor]

Marry you or I do not use the word stripper around your wife.
It is a insulation removal tool 🔧 😀.
I use a knife for removing insulation.

Dave

I have a screwdriver that has a stripper in the handle, I got it at RADIO SHACK about 25 years ago in a computer repair tool kit, it's my go-to for small wire, I also have a small pliers type that's adjustable that works ok, after you get it set right.

[John T]

I use a knife for removing insulation.

Dave

You ARE NOT removing insulation (or stripping wire) from 22-24ga wire with a knife.
You are an IDIOT.

once again.

[smithdoor]

We are welding here so it be 000 wire size.
22 and 24 gauge I use soldering so I do not nick the wire.
If nick the it may brake at the nick.

Dave

You ARE NOT removing insulation (or stripping wire) from 22-24ga wire with a knife.
You are an IDIOT.

once again.

[NotaVegetarian]

Speaking of strippers I need a new pair.

Something that will handle very small wire like telephone or cat 5 wire

I put a new microphone cord on my CB radio last week and I must've cut one of the wires trying to strip them with a razor blade like an idiot.

Any suggestions on a small gauge wire stripper?

Haven't done any research yet

got a kit a few years todo cat5-6 connectors. I think it’s Fluke that’s what’s on the testers. The cutters in it work great for that stuff.

[smithdoor]

The old Japanese radios used a very fine wires and a soldering work great for striping the wires.

Dave

got a kit a few years todo cat5-6 connectors. I think it’s Fluke that’s what’s on the testers. The cutters in it work great for that stuff.

[John T]

got a kit a few years todo cat5-6 connectors. I think it’s Fluke that’s what’s on the testers. The cutters in it work great for that stuff.

Thanks

Ended up buying a set of Klein #11057 wire strippers

5 star review and it's a quality brand so I'm sure they will do what I need.

[John T]

For anyone following,
These Klein strippers are great.
Well worth the $20

Fits in the hand nice/light/nice crisp clean cuts on anything down to 32 gauge stranded or 30 AWG