Does any refurb motherboards?

[user 8329420]

Nothing got derailed; you asked a somewhat complex question without giving enough information (on a subject only tangentially related to welding), then didn't come back for a day to consider the answers a few members had provided, then complain without looking into what occurred (and why) here in the meanwhile, none of which affected the rest of the thread's validity. You still apparently haven't done anything with the information that was already provided.
BTW, most of us (both regulars and guests) aren't electronics experts.

Maybe you'd like a chance to start over?

No thanks, your response made my thoughts about this forum set in stone. I'll be deleting my account now.

Thanks to those that attempted to help.

[whtbaron]

[smithdoor]

I agree 👍 💯.

Dave

[52 Ford]

No thanks, your response made my thoughts about this forum set in stone. I'll be deleting my account now.

Thanks to those that attempted to help.

"Attempted to help". I asked for more info and you didn't respond to me.

Your loss.

Sent from my Lincoln Buzzbox using Tapatalk

[FrankcoProducts]

I repair boards and the 30XP is one I've dealt with. If the switching regulator blew it's likely because there is another component or components that are shorted.

[52 Ford]

I repair boards and the 30XP is one I've dealt with. If the switching regulator blew it's likely because there is another component or components that are shorted.

Yep. That's more or less what I told them.

They decided they were too good for the forum and deleted their account, though.

Sent from my Lincoln Buzzbox using Tapatalk

[FrankcoProducts]

Like I said, I repair them for a living. frankcoproducts.com

[smithdoor]

Has any told MinnesotaDave about this ad?

Dave

Yep. That's more or less what I told them.

They decided they were too good for the forum and deleted their account, though.

Sent from my Lincoln Buzzbox using Tapatalk

[smithdoor]

What cost and do you do reprogramming when need.

Dave

Like I said, I repair them for a living. frankcoproducts.com

[N2 Welding]

Yep. That's more or less what I told them.

They decided they were too good for the forum and deleted their account, though.

Sent from my Lincoln Buzzbox using Tapatalk

But wait, there’s more. His profile says Banned! Not user revoked membership.

[smithdoor]

I guess MinnesotaDave read his ad and told. Him how much it cost to have a ad here.

Dave

But wait, there’s more. His profile says Banned! Not user revoked membership.

[Oldiron2]

I guess MinnesotaDave read his ad and told. Him how much it cost to have a ad here.

Dave

It was the OP who acted like an impatient, self-centered jerk and was banned. Take another careful look at the whole thread to understand all the subjects and aspects being discussed.

[smithdoor]

I am other sites where they have big problem with companies try sell goods and services.
A member can give links and sell things even services. But had on group for a few years and just try help not make living from the group.

The site say online with the ads they sell. If did not the members would have pay.

Dave

It was the OP who acted like an impatient, self-centered jerk and was banned. Take another careful look at the whole thread to understand all the subjects and aspects being discussed.

[FrankcoProducts]

Assessing a cost to repair a board isn't straightforward, I don't flat rate. Sometimes people send me boards that are burned up and other times I receive boards that aren't burned up, as you can imagine to ones that are burned/missing traces will require a little more time and effort which increases the price. Also, some of the components can be proprietary and are not possible to get replacements for. If you can send me a picture of your board I can provide an estimate. As for reprogramming, when I have access to the firmware I do program some of them if it is needed.

[smithdoor]

I just asking so everyone knows

Myself I keep my boards clean and new a battery ever year.

Thank you
Dave

Assessing a cost to repair a board isn't straightforward, I don't flat rate. Sometimes people send me boards that are burned up and other times I receive boards that aren't burned up, as you can imagine to ones that are burned/missing traces will require a little more time and effort which increases the price. Also, some of the components can be proprietary and are not possible to get replacements for. If you can send me a picture of your board I can provide an estimate. As for reprogramming, when I have access to the firmware I do program some of them if it is needed.

[FrankcoProducts]

I understand.

[G-ManBart]

I just asking so everyone knows

Myself I keep my boards clean and new a battery ever year.

Thank you
Dave

You literally have no idea what you're talking about. These aren't motherboards on PCs.