Results 1 to 7 of 7

Thread: Beta-Mig 250

  1. #1
    Join Date
    Jan 2012
    Location
    Orem, Utah
    Posts
    5
    Post Thanks / Like

    Beta-Mig 250

    Does anyone have a wiring diagram for the beta mig 250. I had to pull my full wave rectifier out to check it. Putting it back in I find one small wire I forget where it went. Either it goes on the post where the Low x-former hooks to the rectifier or on the middle of the hi-low switch. Anybody out there that has a manual could you either tell me or forward me a copy of the wiring diagram
    Thank you
    no1fisherman

  2. #2
    Join Date
    Feb 2012
    Posts
    2
    Post Thanks / Like

    Re: Beta-Mig 250

    you still need a owners manual for the unit ??
    if so send me a email and i will forward it to you .

    TS2

  3. #3
    Join Date
    Aug 2009
    Posts
    4,247
    Post Thanks / Like

    Re: Beta-Mig 250

    I'd like one too for my archives! Kindly send to:

    logisticslist61
    AT
    yahoo
    DOT
    com

    Thanks in advance!

    (Yes, dear readers, it's OK for me to post that address since it's also my Spam Dump and IDGAF who knows it.)

    Don't ever post an address that isn't expendable or has your name in it!

  4. #4
    Join Date
    Feb 2012
    Posts
    2
    Post Thanks / Like

    Re: Beta-Mig 250

    i sent it to you this am , sorry for delay
    i dont visit this site that much .
    TS2


    Quote Originally Posted by farmall View Post
    I'd like one too for my archives! Kindly send to:

    logisticslist61
    AT
    yahoo
    DOT
    com

    Thanks in advance!

    (Yes, dear readers, it's OK for me to post that address since it's also my Spam Dump and IDGAF who knows it.)

    Don't ever post an address that isn't expendable or has your name in it!

  5. #5
    Join Date
    Dec 2020
    Posts
    1
    Post Thanks / Like

    Re: Beta-Mig 250

    Hello and Merry Christmas. I have just acquired a beta mig 250. I cleaned the hi low switch but messed up by not taking a picture of the wiring. A senior moment did not allow me to remember which wire goes where. Any body have a diagram so I don't blow the machine up?

  6. #6
    Join Date
    Mar 2010
    Location
    Ceres, California
    Posts
    3,885
    Post Thanks / Like

    Re: Beta-Mig 250

    go to the hobart welder web site and send in a request with your spec number.
    They will send you the owners manual by email for free.

  7. #7
    Join Date
    Aug 2010
    Location
    West Central Ohio
    Posts
    107
    Post Thanks / Like

    Re: Beta-Mig 250

    Name:  BetaMig250.png
Views: 191
Size:  116.6 KB
    A little fuzzy, but maybe it will help.
    Hobart Beta-Mig 250
    T-D Cutmaster 81
    Miller Maxstar 150STL
    Miller T-Bolt 225 AC
    Chicago Electric Mig 151
    Hobart RC-256 Haas-Kamp Conversion(sold)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,634,969,159.26508 seconds with 14 queries